kac7205

• 2-Channel Class AB Car Amplifier
• RMS Power Rating:
  • 4 ohms: 170 watts x 2 chan.
  • 2 ohms: 250 watts x 2 chan.
  • Bridged, 4 ohms: 500 watts x 1 chan.
• Max power output: 500 watts x 2 chan.
• MOSFET power supply
• LED power indicator
• Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
• Speaker impedance: 2-8 ohms (4-8 ohms bridged)
• Bridgeable operation
• Speaker-level inputs with signal sensing for automatic turn-on
• Preamp RCA outputs
• Short circuit, DC offset, overload, and thermal protection circuitry
• Aluminum die cast heat sink
• Built-in cooling fan
• Gold-plated RCA level inputs
• Gold-plated screw terminals
• Variable low-pass filter (50-200 Hz, 24 dB/octave)
• CEA-2006 compliant amplifier
• Frequency response: 5-50,000 Hz
• Dimensions: 13-3/4″L x 2-5/16″H x 9-3/8″D

kac8105d

• Class D Monoblock Car Amplifier
• RMS Power Rating:
  • 4 ohms: 300 watts x 1 chan.
  • 2 ohms: 500 watts x 1 chan.
• Max power output: 1000 watts x 1 chan.
• MOSFET power supply
• LED power indicator
• Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
• Speaker-level inputs with signal sensing for automatic turn-on
• Preamp RCA outputs
• Short circuit, DC offset, overload, and thermal protection circuitry
• Aluminum die cast heat sink
• Speaker impedance: 2-8 ohm
• Gold-plated RCA level inputs
• Gold-plated screw terminals
• Input sensitivity: 0.2-5 Volts
• Variable low-pass filter (50-200 Hz, 24 dB/octave)
• Subsonic filter (15/25 Hz)
• CEA-2006 compliant amplifier
• Frequency response: 10-200 Hz
• Dimensions: 11″L x 2-5/16″H x 9-3/8″D

kac9105d

• Performance Series Class D Monoblock Car Amplifier
• RMS Power Rating:
  • 4 ohms: 500 watts x 1 chan.
  • 2 ohms: 900 watts x 1 chan.
  • 1 ohm: 900 watts x 1 chan.
• Max power output: 1800 watts x 1 chan.
• Digital amplifier technology
• Dual mono driver ready
• MOSFET power supply
• LED power indicator
• Tuned Bass EQ (0-18 dB bass boost at 40 Hz)
• Stackable operation capable
• Phase inverter (0°,180°)
• Speaker-level inputs with signal sensing for automatic turn-on)
• Preamp RCA outputs
• Line output terminals for extension
• Short circuit, DC offset, overload, and thermal protection circuitry
• Aluminum die cast heat sink
• Built-in cooling fan
• Gold-plated RCA level inputs
• Gold-plated screw terminals
• Variable low-pass filter (50-200 Hz, 24 dB/octave)
• Single side exposure terminals for multi-installation
• CEA-2006 compliant amplifier
• Frequency response: 5-200 Hz
• Dimensions: 13-3/4″L x 2-5/16″H x 9-3/8″D

x1200m

The X1200M subwoofer amp pumps out up to 1,200 watts RMS to your subwoofers — plenty enough for even the most power-hungry subs to fill your car with bass. Variable low-pass and infrasonic filters help you tune your sub system to sound its best in your vehicle, while preamp outputs send the audio signal to another amp in your system.

x600f

The X600F 4-channel amplifier delivers 100 watts RMS per channel to your front and rear speakers, perfect for high-quality component speakers. Or bridge the amp to 2-channel mode, and send up to 300 watts each to a pair of subs. The variable high- and low-pass filters tune your system for maximum efficiency and sound quality, while the bass boost adds extra low-end punch when you want it.

xr1s

The eXcelon Reference Fit amplifiers have a small footprint allowing installation in even the tightest of locations. Kenwoods Dual Sigma Drive technology is an advanced negative feedback circuit that improves damping factor and increases accuracy and sound quality. For those who need a truly custom installation the top plate can be removed and replaced with a creation of your choice. For such a small size these amplifiers put out a huge amount of power, just don’t let it go to waste.

xr4s

The Kenwood Excelon “Gouriki” Series amplifiers sport the Japanese characters that stand for “power” and “strength” because these amps are strong and powerful. “Gouriki” amps feature dual power supplies that deliver more consistent voltage so your amp doesn’t break a sweat when you’re driving your system hard. Unique circuitry analyzes the signal going to and coming back from your speakers to increase the amp’s control over cone movement, for tighter, punchier bass.

xr5s

The XR5S 5-channel amp sends 80 watts RMS to each of your front and rear speakers, along with 350 watts RMS to your sub, so you’ll hear your music loud and clear. You can also switch this versatile amp into 3-chanel mode to power your front speakers with 160 watts each, while still sending 350 watts to your sub.

kac8405

• 4-channel car amplifier
• 50 watts RMS x 4 at 4 ohms (75 watts x 4 at 2 ohms)
• 180 watts RMS x 2 bridged output at 4 ohms (4 ohm stable in bridged mode)
• 2-, 3-, and 4-channel operation
• CEA-2006 compliant
• high-pass (12 dB per octave) and low-pass (24 dB per octave) filters variable from 50 to 200 Hz
• variable bass boost (0-18 dB at 40 Hz)
• cooling fan
• MOSFET power supply
• speaker-level inputs with signal sensing turn-on
• preamp-level inputs
• fuse rating: 40A x 1
• 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
• 11-1/16″W x 2-5/16″H x 9-7/8″D