AudioControl LC2i PRO 2-Channel LOC AccuBASS

AccuBASS and dual outputs

LC2i PRO provides speaker-level input with selectable 20 Ω / 60 Ω / 20 kΩ impedance and maximum input of 40 Vrms / 400 W at the 20 kΩ setting. Preamp outputs include main and bass pairs up to 9.5 Vrms / 13 V peak with ±12 dB gain. AccuBASS corrects factory bass roll-off so subwoofer systems hit harder without OEM limiting artifacts.

ACR-1 remote included

The included ACR-1 and 20-foot cable let you adjust level from the dash. GTO signal sensing turns the unit on when it detects speaker-level signal, and a ground isolation switch helps fight noise. THD is 0.01% with >110 dB SNR.

In the box

LC2i PRO, ACR-1, 20′ phone cable, speaker and power connectors, manual, and warranty information.

• 2-channel active LOC with AccuBASS bass correction
• Selectable load impedance: 20 Ω, 60 Ω, 20 kΩ
• Main and bass preamp outputs with discrete level controls
• Maximum preamp output 9.5 Vrms / 13 V peak, ±12 dB gain
• ACR-1 dash remote and 20-foot cable included
• GTO signal sensing turn-on and ground isolation switch
• Maximum speaker-level input 40 Vrms / 400 W (20 kΩ setting)
• THD 0.01% and signal-to-noise >110 dB
• Speaker and power connectors included

• AccuBASS and ACR-1 distinguish LC2i PRO from the simpler LC1i.

• AudioControl LC2i PRO
• ACR-1 dash remote
• 20′ remote cable
• Speaker and power connectors
• Owner’s manual and warranty information

• AudioControl LC2i PRO product page