-
AudioControl EPIC4000 Mono Amplifier 4000W RMS
The AudioControl EPIC4000 is a competition-oriented Class D monoblock rated for 4000 watts RMS at 1 ohm and 2000 watts at 2 ohms (14.4 V). It includes the ACR-E remote level control and an Epicenter Link harness, with variable low-pass and subsonic filters plus EPICBoost bass EQ. Pair it with a separately sold Epicenter processor when you want bass restoration in the same system.
$549.00 -
AudioControl EPIC2000 Mono Amplifier 2000W RMS
The AudioControl EPIC2000 is a compact Class D monoblock subwoofer amplifier rated for 2000 watts RMS at 1 ohm, 1400 watts at 2 ohms, and 800 watts at 4 ohms (14.4 V). It includes the ACR-E remote level control, an Epicenter Link harness, variable low-pass and subsonic filters, and EPICBoost bass EQ. Pair it with a separately sold Epicenter processor when you want bass restoration in the same system.
$379.00 -
AudioControl EPIC1500 Mono Amplifier 1500W RMS
The AudioControl EPIC1500 is a compact Class D monoblock subwoofer amplifier rated for 1500 watts RMS at 1 ohm, 1000 watts at 2 ohms, and 600 watts at 4 ohms (14.4 V). It includes the ACR-E remote level control, an Epicenter Link harness, variable low-pass and subsonic filters, and EPICBoost bass EQ. Pair it with a separately sold Epicenter processor when you want bass restoration in the same system.
$279.00 -
AudioControl EPIC750 Mono Amplifier 750W RMS
The AudioControl EPIC750 is a compact Class D monoblock subwoofer amplifier rated for 750 watts RMS at 1 ohm, 500 watts at 2 ohms, and 300 watts at 4 ohms (14.4 V). It includes the ACR-E remote level control, an Epicenter Link harness, variable low-pass and subsonic filters, and EPICBoost bass EQ. Pair it with a separately sold Epicenter processor when you want bass restoration in the same system.
$205.00 -
AudioControl D-5.1300 5-Channel DSP Amplifier
The AudioControl D-5.1300 is a high-power 5-channel DSP matrix amplifier with AccuBASS, independent crossovers, 30-band EQ with auto EQ, signal summing, signal delay, and built-in RTAs. Eight active speaker-level inputs and six line-level inputs support complex OEM integrations. At 14.4 V it is rated 100 W x 4 + 300 W x 1 at 4 ohms and 200 W x 4 + 500 W x 1 at 2 ohms.
$2,779.00 -
AudioControl DM-810 8×10 DSP Matrix Processor
The AudioControl DM-810 is an 8-input, 10-output DSP matrix processor for optimizing factory or aftermarket systems. Input/output RTAs, GTO signal sensing, MILC clip detection, AccuBASS, signal summing, signal delay, 12/24 dB crossovers, and a 30-band EQ give installers deep tuning control. Use the DM Smart DSP app on Mac/PC or mobile, with optional ACR-3 remote and AC-BT24 Bluetooth accessories sold separately.
$899.00 -
AudioControl Epicenter PRO Bass Processor
The AudioControl Epicenter PRO builds on classic Epicenter bass restoration with balanced inputs, a built-in line driver, selectable PFM subsonic filter, and selectable output voltage for flexible system design. The included ACR-4 remote adjusts the Epicenter effect from the dash. Frequency response is 10 Hz–22 kHz ±1 dB with >105 dB signal-to-noise and 0.03% THD.
$199.00 -
AudioControl LC5iPRO 5-Channel LOC AccuBASS
The AudioControl LC5iPRO is a 5-channel line output converter with AccuBASS, LMC load matching, and an included ACR-1 dash remote. Four main channels plus a bass output with discrete level controls help you feed multi-amp systems from factory speaker-level signals. Load selection, GTO sensing, and ground isolation target difficult OEM integrations that need more than a 2-channel LOC.
$279.00 -
AudioControl LC2i PRO 2-Channel LOC AccuBASS
The AudioControl LC2i PRO is a 2-channel line output converter with AccuBASS bass restoration, load selection switches, and an included ACR-1 dash remote. Discrete main and bass preamp outputs with level controls help you feed amplifiers cleanly from factory speaker-level signals. GTO signal sensing and a ground isolation switch streamline OEM installs that need more than a basic LOC.
$175.00 -
AudioControl LC1i 2-Channel LOC & Line Driver
The AudioControl LC1i is an active 2-channel line output converter and line driver that unlocks a clean preamp signal from factory speaker-level outputs. Load selection switches, GTO signal sense, and audio sense turn-on options simplify OEM integration, while ±12 dB output gain and up to 9.5 Vrms output help drive aftermarket amplifiers. Speaker and power connectors are included in the box.
$149.00 -
AudioControl ACR-3 Dash Remote Level Control
The AudioControl ACR-3 adds remote level control for compatible AudioControl processors and amplifiers, including DM-series DSP units and several matrix amplifiers. It ships with a 20-foot cable and a removable mounting enclosure for custom dash installations. Confirm your model against the official compatibility list—ACR-3 is not the same remote as ACR-1 or ACR-E.
$49.00 -
AudioControl ACR-1 Dash Remote Level Control
The AudioControl ACR-1 adds precise remote level control to compatible AudioControl processors and amplifiers so you can adjust from the driver’s seat. It is the replacement remote for The Epicenter and ships with a 20-foot remote cable plus a metal housing with integrated mounting tabs that can be removed for custom flush-mount installs. Confirm compatibility with your specific AudioControl model before ordering.
$79.00