Audiovox ADVBSD30 Blind Spot Detection System

Behind-bumper radar kit with LED and cross-traffic alerts

$649.99

Out of stock

Overview

The Audiovox ADVBSD30 is a professionally installed blind-spot detection kit that uses behind-bumper radar sensors. It alerts the driver to traffic in a side blind-spot zone, during an overtaking pass, and to cross traffic from either side while reversing. Alerts are given with flush-mount LED indicators and a buzzer. Official documents disagree on the default GPS turn-on speed (15 mph vs. 20 mph), and an installer can change that setting. This is a driver aid, not a substitute for mirrors or a shoulder check.

Want it installed? Chat with us for an installation quote. We'll add the labor right to your cart. Chat about installation
Compare
SKU: ADVBSD30 Categories: , Brand:
Product details

Radar coverage and alert types

The owner’s guide describes a detection area on both sides of the vehicle, extending rearward from the exterior mirrors to about 15–30 feet beyond the bumper. When a target is in the blind-spot zone, the corresponding LED lights solid; if that turn signal is also on, the LED flashes and the buzzer sounds. Rear cross-traffic alert is active in reverse, with a detection area the official guide describes as about 25 feet to each side. An overtaking alert is also included.

Installation and adjustments

Radar sensors are designed to mount behind the bumper. The kit includes metal and plastic mounting brackets, an alignment tool, LED indicators, a buzzer with off/low/high volume, a GPS antenna, harnesses, and the control module. Speed-based activation uses the GPS antenna; official documents list the default on-speed as 15 mph in the owner’s guide and as 20 mph on the VOXX product page and warranty guide. An authorized installer can change speed activation or sensitivity. Components are described as IP67 waterproof-rated for exterior use. Professional installation is required.

Important limits

The system is a driver aid only. Official warnings say it does not replace checking mirrors and looking over your shoulder. It may not operate correctly if sensors are blocked, in severe weather, or when other vehicles move through the zone unusually fast or slow. False alerts can occur from trailers, guardrails, barrels, or similar objects. Warranty coverage in the included card is a 3-year limited warranty from Audiovox Electronics Corporation.

Key features
  • Behind-bumper radar sensors for side blind-spot detection
  • Rear cross-traffic alerts while the vehicle is in reverse
  • Overtaking alert when a vehicle is in the side detection zone during a pass
  • Flush-mount LED indicators and a volume-adjustable buzzer
  • GPS-based speed activation, with installer-selectable settings
  • Alignment tool, metal and plastic mounting brackets included
  • IP67 waterproof rating for exterior components, per the official product page
  • 3-year limited warranty (Audiovox Electronics Corporation warranty card)
Specifications
Weight 4.7 lbs
Dimensions 13.6 × 9.6 × 4 in
Brand

Audiovox

Model

ADVBSD30

SKU

ADVBSD30

Product type

Blind-spot and rear cross-traffic detection kit

Sensors

Behind-bumper radar (pair)

Alerts

Flush-mount LEDs and buzzer

Rear cross-traffic

Yes, in reverse

Overtaking alert

Yes

Waterproof rating

IP67 (official product page, exterior components)

Install

Professional installation required

Warranty

3-year limited (Audiovox Electronics Corporation warranty card)

Important notes
  • This is a driver aid only. It does not replace mirrors or a shoulder check before a lane change.
  • Professional installation is required for sensor placement, aiming, and setup.
  • Official documents list different default GPS activation speeds: 15 mph in the owner’s guide, and 20 mph on the VOXX product page and warranty guide. An installer can change this setting.
  • A trailer or nearby roadside objects can cause false alerts.
  • New brand term: inventory and the warranty card use Audiovox; the current marketing site is VOXX by Gentex. The import uses brand Audiovox to match the warranty and the inventory file.
What's in the box
  • BSD sensor (qty 2)
  • Control module (qty 1)
  • Main harness (qty 1)
  • Sensor harness (qty 2)
  • GPS antenna (qty 1)
  • LED indicator (qty 2)
  • LED extension (qty 1)
  • Buzzer (qty 1)
  • Metal mounting bracket (qty 2)
  • Plastic mounting bracket (qty 8)
  • Sensor alignment tool (qty 1)
  • Installation hardware kit (qty 1)
  • Install / owner’s guides (qty 2)
Manuals and downloads

Main Menu

$649.99

Select at least 2 products
to compare