Kenwood KCA-RC35MR IPX7 Wired Marine Remote Control
Waterproof wired remote for Kenwood marine and motorsports receivers
$109.99
Overview
The Kenwood KCA-RC35MR is a compact wired remote that lets you run a compatible Kenwood marine or motorsports receiver from another spot on your boat or vehicle. It handles volume, source and track changes, has white key lighting for after-dark use and carries an IPX7 waterproof rating. Up to six of these remotes can be connected in line. Kenwood does not publish a list of compatible receivers, so confirm that yours accepts a wired marine remote before you order.
Product details
Control from more than one position
The KCA-RC35MR wires into a compatible KENWOOD Marine/Motorsports receiver and puts volume, source and track control within reach when the main unit is not. Kenwood allows up to six of these remotes to be connected in line, so several seating or helm positions can each have their own set of buttons.
Made for wet, open-air use
Kenwood designed this remote specifically for marine and motorsports installs and gives it an IPX7 waterproof rating. White key illumination keeps the controls easy to read at night.
Small footprint
The round body is 2-5/8 inches across and stands 5/8 inch above the mounting surface. It has an 8-inch cable, and a mounting bracket, hardware and a foam gasket come in the box.
Key features
- Wired remote for KENWOOD Marine/Motorsports receivers with volume, source and track control
- Operate the receiver from a position away from the main unit
- IPX7 waterproof design made for marine and motorsports use
- White key illumination keeps the buttons easy to see in low light
- Up to six remotes can be connected in line for multiple control positions
- Compact round body measures 2-5/8 inches across with a 5/8-inch mounting height
- Comes with an 8-inch cable for connection to your system wiring
Specifications
| Brand | Kenwood |
|---|---|
| Model | KCA-RC35MR |
| Product type | Wired marine remote control |
| Designed for | KENWOOD Marine/Motorsports receivers |
| Controls | Volume, source, track |
| Water resistance | IPX7 waterproof |
| Key illumination | White |
| Diameter | 2-5/8 in |
| Mounting height | 5/8 in |
| Cable length | 8 in |
| Maximum remotes in line | 6 |
Important notes
- Works with compatible KENWOOD Marine/Motorsports receivers only. Kenwood does not list specific models, so confirm your receiver accepts a wired marine remote before ordering.
- The cable is 8 inches long. Plan your wiring route to the receiver; additional wire may be needed for longer runs.
- A receiver, extra wiring and installation are not included.
- Kenwood allows a maximum of six KCA-RC35MR remotes connected in line on one system.
What's in the box
- Kenwood KCA-RC35MR wired marine remote with attached leads
- 1-amp mini-ATC fuse, installed on the power lead
- Mounting bracket
- Bolt
- Lock washer
- Wing nut
- Self-adhesive foam gasket
- Instruction manual
Manuals and downloads
Kenwood has not posted an official manual or spec sheet for the KCA-RC35MR on its manual site. Installation instructions are packed with the remote.
