Kenwood eXcelon KFC-XP6902C 6×9″ + 2-3/4″ Component Speakers

6×9 plus 2-3/4 component set

Kenwood built the eXcelon KFC-XP6902C as a vehicle-specific component package: a shallow 6×9-inch polypropylene woofer for the door and a 2-3/4-inch mid-high speaker for the dash. Kenwood lists custom fit for select Chevrolet, Dodge and Toyota vehicles, and includes a 6×9 multi-use bracket.

Acrylic carbon hybrid mid-high

Kenwood’s feature list names an acrylic carbon hybrid cone on the mid-high speaker (its electrical table also lists a PP cone with a sub cone). An in-line network crosses over at 850 Hz with a -6 dB/octave slope (woofer LPF bypass selectable).

Power and response

The system handles 100 watts RMS (CTA) and 300 watts peak at 4 ohms. Sensitivity is 84 dB at 1 watt/1 meter (CTA). Kenwood’s general features list frequency response as 45 Hz to 20 kHz; its electrical CTA table lists 45 Hz to 23 kHz. This listing uses 45 Hz to 20 kHz from the general features.

Fit

Each 6×9 woofer needs an 8-9/16 x 5-11/16-inch cutout and 2-3/4 inches of mounting depth. Each 2-3/4-inch mid-high needs a 2-7/16-inch cutout and 1-5/16 inches of mounting depth. Spacers, in-line networks and mounting hardware are included. Before you install, check those openings and depths against the locations in your vehicle.

• Kenwood eXcelon 6x9-inch plus 2-3/4-inch component speaker system
• Shallow 6x9 polypropylene woofer with a rubber surround and a steel basket
• 2-3/4-inch mid-high speaker with an acrylic carbon hybrid cone
• Handles 100 watts RMS (CTA) and 300 watts peak at 4 ohms
• Sensitivity of 84 dB (CTA) and frequency response from 45 Hz to 20 kHz
• Woofer cutout 8-9/16 x 5-11/16 in and mounting depth 2-3/4 in
• Mid-high cutout 2-7/16 in and mounting depth 1-5/16 in
• 6x9 multi-use bracket, spacers, in-line networks and mounting hardware included

• Woofer mounting depth is 2-3/4 inches (70 mm). Mid-high mounting depth is 1-5/16 inches (34 mm). Check both locations before installing.
• Kenwood lists custom fit for select Chevrolet, Dodge and Toyota vehicles. Confirm fit for your vehicle against Kenwood's supported vehicle chart before ordering.
• Kenwood's own pages conflict on frequency response (general features 45 Hz-20 kHz; electrical CTA table 45-23,000 Hz). This listing uses 45 Hz-20 kHz.
• Kenwood's own pages conflict on the mid-high cone (feature: acrylic carbon hybrid; electrical table: PP cone + sub cone). This listing uses acrylic carbon hybrid from the feature list.

• Kenwood eXcelon KFC-XP6902C woofers (2)
• 2-3/4-inch mid-high speakers (2)
• Bracket for woofer (2)
• Spacer for woofer (2)
• In-line network (2)
• Speaker cord for woofer 0.3 m (2)
• Tapping screws φ4 x 16 mm for woofer (8)
• Tapping screws φ4 x 25 mm for woofer (8)
• Cushion sets for brackets, woofer and 2.75-inch midrange (as packed)

• Instruction manual (B5E-0218-00) — shared with KFC-XP6903C