Rockford Fosgate P3SD410 Punch 10″ Shallow Dual 4-Ohm Sub
Shallow Punch P3 10-inch DVC subwoofer with 300 W RMS
$229.99
Overview
The Rockford Fosgate P3SD410 is a shallow Punch P3 10-inch subwoofer with dual 4-ohm voice coils and 300 watts RMS power handling (600 watts max). A die-cast low-profile basket and 3.50-inch mounting depth fit spaces where a deep woofer will not. Kevlar-reinforced paper cone, Nomex voice-coil collar, and a reversible cast aluminum trim ring are included. Sold as a single woofer; an enclosure is not included.
Product details
Shallow Punch bass
When cabin depth rules out a standard woofer, the P3SD410 keeps Punch-level bass in play. Rockford Fosgate rates it at 300 watts RMS and 600 watts max with dual 4-ohm voice coils you can wire for 2-ohm or 8-ohm loads. The rigid die-cast aluminum low-profile basket and high-excursion Poly-Ether-Ester surround are built for limited-depth installs behind seats, under benches, and in compact enclosures.
Motor and cone
A Kevlar fiber-reinforced semi-pressed paper cone with an ABS/Acrylic dustcap stays stiff without adding unnecessary mass. The high-temp voice coil uses a spun-laced Nomex reinforcement collar, and a linear spider with embedded 16 AWG tinsel leads plus a vented spider cavity help manage heat. An extended pole piece, bumped vented backplate, custom 10-AWG nickel-plated push terminals, and a protective PVC magnet cover round out the motor.
Fit
Mounting depth is only 3.50 inches (8.89 cm) with a 9.0-inch (22.86 cm) cutout. Sensitivity is 83 dB (1 W/1 m). The reversible diamond-cut cast aluminum trim ring is included; an optional grille insert seats in that ring and is sold separately. Plan your sealed or vented enclosure around Rockford Fosgate’s shallow-mount guidance for this model. CEA-2031 compliance means the RMS rating follows the industry test method.
Key features
- 10-inch shallow Punch P3 subwoofer with dual 4-ohm voice coils
- 300 watts RMS / 600 watts max power handling (CEA-2031)
- Only 3.50 inches (8.89 cm) mounting depth for tight spaces
- Kevlar fiber-reinforced paper cone with ABS/Acrylic protective dustcap
- Die-cast aluminum low-profile basket with vented spider cavity
- High-temp voice coil with spun-laced Nomex reinforcement collar
- Custom 10-AWG nickel-plated push terminals for heavy speaker wire
- Reversible diamond-cut cast aluminum trim ring ships in the box
Specifications
| Weight | 13.4 lbs |
|---|---|
| Dimensions | 6.5 × 12.75 × 13 in |
| Size | 10 inch |
| Brand | Rockford Fosgate |
| Model | P3SD410 |
| SKU | P3SD410 |
| Product type | Subwoofer |
| Subwoofer type | Shallow |
| Voice coil | Dual voice coil |
| Nominal impedance | Dual 4 ohm |
| Power handling | 300 W RMS / 600 W max |
| Voice coil diameter | 2.5 in 4-layer (6.35 cm) |
| Magnet weight | 46 oz |
| Sensitivity | 83 dB (1 W / 1 m) |
| Fs | 45 Hz |
| Qts | 0.73 |
| Xmax | 10.8 mm |
| Mounting depth | 3.50 in (8.89 cm) |
| Cutout diameter | 9.0 in (22.86 cm) |
| Woofer displacement | 0.061 cu. ft. (1.73 L) |
| Shipping weight | 13.40 lb (6.07 kg) |
| Speaker connector | Dual 10 AWG compression |
| Trim ring | Cast aluminum, reversible (included) |
| Grille | Optional (sold separately) |
| CEA-2031 | Compliant |
Important notes
- Sold as a single subwoofer. An enclosure, amplifier, wiring, and grille are not included.
- Dual 4-ohm voice coils can be wired to 2 ohms or 8 ohms at the amplifier. Match the final load to your amp’s ratings.
- Confirm your enclosure or vehicle cavity clears the 3.50-inch mounting depth and 9.0-inch cutout.
- An optional grille insert for the included trim ring is sold separately.
What's in the box
- Rockford Fosgate P3SD410 subwoofer (1)
- Diamond-cut cast aluminum trim ring
