-
T-SPEC VPNB4 MANL All-In-One Dist Block 4 Pos
Expand a multi-amp power system with the T-SPEC VPNB4 MANL all-in-one distribution block. The positive side accepts dual 1/0–4 AWG inputs and four 4/8 AWG fused outputs, while the negative side accepts one 1/0–4 AWG input and four 4/8 AWG outputs. Solid brass construction and a black nickel finish are specified, and MANL fuses are sold separately. Chat with CarToyz for fuse planning and professional installation.
$68.99 -
T-SPEC VPNB2 MANL Power/Ground Block 2 Position
Combine power and ground distribution with the T-SPEC VPNB2 MANL block. The positive side accepts dual 1/0–4 AWG inputs and two 4/8 AWG outputs, while the negative side accepts one 1/0–4 AWG input and two 4/8 AWG outputs. It works with MANL fuses and uses solid brass construction with a black nickel finish. Fuses are sold separately. Ask CarToyz for a system layout review and installation quote.
$39.99 -
T-SPEC VMANL MANL Fuse Holder for 4–8 AWG Cable
Protect a 4 to 8 AWG power cable with the T-SPEC VMANL MANL fuse holder. A rotatable base allows orientation during mounting, and the holder works with MANL fuses. Dual-size gaskets for 4 and 8 AWG wire, rounded set screws, and T-20 Torx hardware support a secure clamp under the TPE overmold. The fuse is sold separately. Chat with CarToyz for amperage selection and professional installation.
$16.99 -
T-SPEC VFDB4 MANL Fuse Distribution Block 4 Out
Distribute fused power with the T-SPEC VFDB4 MANL distribution block. One 1/0–4 AWG input feeds four 4/8 AWG fused outputs designed for MANL fuses. Solid brass construction, a black nickel finish, and a TPE soft-touch overmold form the body, with dual-size gaskets and T-20 Torx hardware for installation. MANL fuses are sold separately. Ask CarToyz to size fuses and schedule installation.
$55.99 -
T-SPEC VDB3 3-Position Ground Distribution Block
Organize amplifier grounds with the T-SPEC VDB3 three-position ground distribution block. It accepts one 1/0–4 AWG input and three 4/8 AWG outputs for multi-amp ground returns. Solid brass construction with a black nickel finish and TPE soft-touch wrap supports the connection, and dual gasket sizes with T20 Torx screws are specified. Plan cable gauges before installation and ask CarToyz for a labor quote.
$29.99 -
T-SPEC VANL ANL Fuse Holder for 1/0–4 AWG
Protect a power run with the T-SPEC VANL ANL fuse holder for 1/0 to 4 AWG cable. It works with standard ANL fuses and includes a dual-size gasket set for 1/0 and 4 AWG wire. Rounded set screws and T-20 Torx hardware support clean clamping, and the TPE soft-touch overmold adds grip. The fuse is sold separately. Chat with CarToyz for fuse amperage, cable kits, and installation appointments.
$35.99 -
T-SPEC V8-ST3 8 AWG #10 Spade Terminals 5-Pack
Connect 8 AWG cable with the T-SPEC V8-ST3 nickel-plated #10 spade terminal five-pack. The pack includes three red and two black terminals for polarity identification. Match the #10 spade size to the amplifier or block screw before crimping, and use only on 8 AWG cable. CarToyz can help confirm terminal style and schedule professional installation when you are ready.
$6.99 -
T-SPEC V8-ST1 4 AWG Spade Terminals 1/4 in 5pk
Connect 4 AWG cable at an amplifier or distribution point with the T-SPEC V8-ST1 nickel-plated spade terminal five-pack. Terminals are specified for a 1/4 in connection, and the pack includes three red and two black pieces for polarity marking. Crimp only to 4 AWG cable and match the screw or post size on the equipment. Ask CarToyz for help selecting ring versus spade terminals for the job.
$8.99 -
T-SPEC V8-RTN8 4 AWG Ring Terminals 1/4 in 5pk
Terminate 4 AWG cable with the T-SPEC V8-RTN8 nickel-plated ring terminal five-pack. Official specifications call for a 1/4 in stud hole, and the pack includes three red and two black terminals. This SKU differs from V8-RTN10, which uses a 3/8 in stud hole on the same 4 AWG cable size. Confirm stud diameter on the battery or distribution hardware before ordering through CarToyz.
$11.99 -
T-SPEC V8-RTN19 8 AWG Ring Terminals 3/8 in 5pk
Terminate 8 AWG cable with the T-SPEC V8-RTN19 nickel-plated ring terminal five-pack. Official specifications call for a 3/8 in stud hole, and the pack includes three red and two black terminals for power and ground identification. Crimp only to 8 AWG cable and verify the stud size on the battery post, fuse holder, or block. CarToyz can quote terminals with matching cable and professional installation.
$8.99 -
T-SPEC V8-RTN10-20 4 AWG Ring Terminals 3/8 20pk
Stock 4 AWG ring terminals with the T-SPEC V8-RTN10-20 twenty-pack. Terminals are nickel-plated for 4 AWG cable and use a 3/8 in stud hole. The assortment includes ten red and ten black terminals for repeated installs or shop inventory. It matches the stud size of the V8-RTN10 five-pack. Confirm 3/8 in hardware before ordering larger quantities through CarToyz.
$38.99 -
T-SPEC V8-RTN10 4 AWG Ring Terminals 3/8 in 5pk
Terminate 4 AWG cable with the T-SPEC V8-RTN10 nickel-plated ring terminal five-pack. Official specifications call for a 3/8 in stud hole, and the pack includes three red and two black terminals. This SKU differs from V8-RTN8, which uses a 1/4 in stud hole on the same 4 AWG cable size. Confirm battery or block stud diameter before ordering, then chat with CarToyz for crimping and installation support.
$11.99