-
T-SPEC V8-RTN1 1/0 AWG Ring Terminals 1/4 in 5pk
Terminate 1/0 AWG power or ground cable with the T-SPEC V8-RTN1 nickel-plated ring terminal five-pack. Each terminal is specified for a 1/4 in stud hole, and the pack includes three red and two black terminals for polarity identification. Crimp only to 1/0 AWG cable and match the stud hardware on the battery, fuse holder, or distribution block. Ask CarToyz if you need the matching cable kit or professional crimping.
$17.99 -
T-SPEC V8R174 4-Channel RCA Cable 17 Foot
Route four channels of audio signal with the T-SPEC V8R174 17 ft RCA cable. Its twisted-wire design is intended to improve noise rejection, while the ultra-flexible PVC-blended jacket helps during routing through the cabin and cargo area. Compact molded ABS ends use dual split-tip connectors for contact at the jack. Measure the path from source unit to amplifiers so the 17 ft length covers the run without excess coil.
$29.99 -
T-SPEC V8-ANL200 200A ANL Fuses 2-Pack Nickel
Protect a high-current power circuit with T-SPEC V8-ANL200 nickel-plated ANL fuses. Each package contains two 200A ANL fuses, and each fuse includes a status window for a quick visual check. Install them only in a compatible ANL fuse holder that matches the cable size and amplifier load. Choose the amperage from the amplifier and wiring guidance, then ask CarToyz for holder options and installation help.
$8.99 -
T-SPEC V8-ANL150 150A ANL Fuses 2-Pack Nickel
Protect a high-current power circuit with T-SPEC V8-ANL150 nickel-plated ANL fuses. Each package contains two 150A ANL fuses, and each fuse includes a status window for a quick visual check. Install them only in a compatible ANL fuse holder that matches the cable size and amplifier load. Choose the amperage from the amplifier and wiring guidance, then ask CarToyz for holder options and installation help.
$8.99 -
T-SPEC V6-RAK8 V6 Amp Kit with RCA 8 AWG 400W
Connect an amplifier with the T-SPEC V6-RAK8 V6 amp kit for systems up to 400W. It supplies 17 ft of 8 AWG CCA power wire, 3 ft of 8 AWG CCA ground wire, 17 ft of 18 AWG remote wire, and a 17 ft V6 noise-rejecting woven coaxial RCA cable. A proprietary V6 MINI-ANL fuse holder with a 30A fuse and nickel-plated terminals are included. Verify gauge and fuse requirements for the amplifier before purchase or professional installation.
$47.99 -
T-SPEC V6-RAK4 V6 Amp Kit with RCA 4 AWG 1000W
Install an amplifier with the T-SPEC V6-RAK4 V6 amp kit for systems up to 1000W. The kit includes 17 ft of 4 AWG CCA power wire, 3 ft of 4 AWG CCA ground wire, 17 ft of 18 AWG remote wire, and a 17 ft V6 noise-rejecting woven coaxial RCA cable. A proprietary V6 MINI-ANL fuse holder with a 60A fuse and nickel-plated terminals complete the power path. Match cable gauge and fuse rating to the amplifier before you schedule installation.
$74.99 -
T-SPEC V6-RAK1-0 V6 Amp Kit with RCA 1/0 AWG 2400W
Wire an amplifier with the T-SPEC V6-RAK1-0 V6 amp installation kit. It includes 17 ft of 1/0 AWG CCA power wire, 3 ft of 1/0 AWG CCA ground wire, 17 ft of 18 AWG remote turn-on wire, and a 17 ft V6 noise-rejecting woven coaxial RCA cable. A proprietary V8 ANL fuse holder with a 150A fuse plus nickel-plated ring and spade terminals support systems rated up to 2400W. Confirm CCA cable and fuse sizing for the amplifier before installation.
$154.99