-
JBL Cruise 8mm Bolt Kit for Handlebar Speakers
PWSACCCRUISEM8 is the 8 mm bolt kit for JBL Cruise motorcycle handlebar speakers when the stock clamp hardware is not the right fit. Use it to secure Cruise and Cruise Chrome bars to compatible mounts. Hardware-only accessory — not a speaker. JBL Cruise and Cruise Chrome soundbars are sold separately.
$19.95 -
AudioControl EPICPRO6S 6.5″ Slim Midrange Pair
The AudioControl EPICPRO6S is a pair of 6.5-inch slim midrange speakers rated 200 W RMS / 300 W max at 4 ohms. A shallow 2.0-inch mounting depth and 93.1 dB sensitivity (1W/1m) support loud, efficient midrange projection for show builds or clean stock-looking installs. System frequency response is 120–8000 Hz. Two speakers and a user manual ship in the box.
$115.00 -
Rockford Fosgate RFK-HD14M5 Harley Amp Install Kit
Wire an M5-series amp into a supported Harley with the Rockford Fosgate RFK-HD14M5 Gen-3 installation kit. It is built for select 2014–2023 Road Glide, Street Glide, Ultra, and CVO models and includes 8 AWG power and ground cable, 16 AWG speaker wire, and a MAXI fuse holder sized at 60 Amp. The amplifier, source unit, and speakers are sold separately.
$369.99 -
Stinger SI123 1000 Series 2-Channel Coaxial RCA Cable
The Stinger SI123 is a 3 ft 2-channel coaxial RCA interconnect built to carry your source unit’s signal to an amplifier with minimal noise. Coaxial construction helps reject noise along the signal path. two heavy-gauge conductors per channel. It is a straightforward way to replace a worn cable or plan a clean new amplifier install. Confirm the length you need by measuring your planned route from the radio to the amplifier, allowing extra slack for bends, panels, and connections at both ends.
$8.99 -
Kenwood eXcelon XM160-2-98 2-Channel Harley-Davidson Amplifier
The Kenwood eXcelon XM160-2-98 is a Class D 2-channel amplifier made to plug and play in select 1998-2013 Harley-Davidson motorcycles. It delivers 80 watts x 2 RMS at 2 ohms and works with the factory Harley-Davidson radio or an aftermarket receiver, with no radio flash required. Supplied harnesses handle power, speaker-level input and speaker output, and a bypass port lets you add a second amp later.
$439.99 -
Soundstream HDHU.14Si 7″ CarPlay Head Unit for 2014+ Harley Touring
The Soundstream Reserve HDHU.14Si is a 7-inch touchscreen head unit made to replace the factory radio on 2014-and-newer Harley-Davidson touring motorcycles. It runs Apple CarPlay and Android Auto through a USB connection, adds Bluetooth audio and calling, and drives the speakers with a built-in four-channel amplifier.
Installation uses the factory mounting points, USB connector, and radio antenna, and a pre-wired harness is included. An iDatalink Maestro module is required and sold separately.
$899.99 -
Rockford Fosgate PP4-X Punch Pro Passive Crossover
Match Punch Pro midrange drivers and tweeters with the Rockford Fosgate PP4-X passive crossover. It is sold individually and is rated 125 watts RMS (250 watts max). A 6 dB/octave low-pass at 3 kHz feeds the woofer outputs, while selectable 4-ohm or 8-ohm tweeter impedance and 0 / −3 / −6 dB attenuation shape the highs. Dual woofer outputs support two Punch Pro midrange drivers on a 4-ohm load.
$99.99 -
Raptor RLOC Mid Series 2-Channel Line Output Converter
The Raptor RLOC is a Mid Series 2-channel line output converter in a compact housing for aftermarket amplifier installs. Metra rates it to handle up to 30 watts of input power when converting a compatible speaker-level signal to RCA-level outputs. Confirm the source output type and the amplifier’s RCA input requirements before installation, and do not exceed the stated input power handling.
$29.99 -
T-SPEC VPNB4 MANL All-In-One Dist Block 4 Pos
Expand a multi-amp power system with the T-SPEC VPNB4 MANL all-in-one distribution block. The positive side accepts dual 1/0–4 AWG inputs and four 4/8 AWG fused outputs, while the negative side accepts one 1/0–4 AWG input and four 4/8 AWG outputs. Solid brass construction and a black nickel finish are specified, and MANL fuses are sold separately. Chat with CarToyz for fuse planning and professional installation.
$68.99 -
AudioControl Three.2 In-Dash EQ Processor
The AudioControl Three.2 is a discontinued in-dash equalizer and line driver with stereo graphic EQ, ParaBASS low-frequency contouring, dual auxiliary inputs, and an adjustable 24 dB/octave Linkwitz-Riley crossover with bypass. Preamp gain up to 20 dB and 9.5 Vrms maximum output support clean multi-amp systems. Selectable cool blue or hot red back-lighting fits the dash. Specifications follow AudioControl archive documentation.
$249.99$299.99AudioControl Three.2 In-Dash EQ Processor
$249.99$299.99 -
Raptor RAGU Pro Series Water-Resistant AGU Fuse Holder
The Raptor RAGU is a Pro Series AGU fuse holder for 4 or 8 AWG input and output connections on amplifier power runs. Metra lists 24K gold-plated contacts, water-resistant construction, and 3mm Allen screws for secure terminations. Pair it with an AGU fuse sized for the amplifier and wiring plan; the fuse itself is not confirmed as included on the manufacturer feature list, so verify packing before you schedule the install.
$19.99 -
Soundstream BX-10 Digital Bass Reconstruction Processor
The Soundstream BX-10 is a digital bass reconstruction processor that restores low-frequency content lost in recordings. Sweep sets the center frequency between 27 Hz and 63 Hz, Width adjusts the Q around that center, and the included dash remote controls the bass equalizer output from the driver’s seat. A PFM subsonic filter switch offers 35 Hz, 50 Hz, and 80 Hz settings.
$99.99
