-
Rockford Fosgate RFI2SW Speaker-Wire-to-Male-RCA Signal Adapter
The Rockford Fosgate RFI2SW connects speaker-level wiring to male RCA plugs for a compatible amplifier input. It is intended for an installation that takes the audio signal from a factory source unit rather than a dedicated low-level RCA output. Oxygen-free copper, platinum-plated ends and split center pins support the physical connection. This adapter must be used according to the manufacturer’s installation instructions; the input requirements of the amplifier are important to the connection.
$14.99 -
Kenwood KFC-1066S 4″ 2-Way Coaxial Car Speakers
The Kenwood KFC-1066S is a pair of 4-inch 2-way coaxial car speakers. Each speaker combines a polypropylene woofer cone with a cloth surround and a 1-inch balanced dome tweeter with a neodymium magnet. They handle 21 watts RMS and 220 watts peak at 4 ohms, with 88 dB sensitivity and a 50 Hz to 22 kHz response. Mounting depth is only 1-11/16 inches, and grilles are included.
$59.99 -
AudioControl ACR-2 Dash Remote Level Control
The AudioControl ACR-2 is a discontinued wired dash remote intended for select AudioControl processors such as the LCQ-1 and The Epicenter Plus. It provides remote level (and on LCQ-1, EQ bypass) control from the driver’s seat and ships with a remote cable. Chassis dimensions are 1.75 in W x 2.5 in D x 1.0 in H with a weight of 2.3 oz. Confirm you need ACR-2 specifically—many current products use ACR-1, ACR-3, or ACR-E instead.
$59.00 -
T-SPEC V6-RAK1-0 V6 Amp Kit with RCA 1/0 AWG 2400W
Wire an amplifier with the T-SPEC V6-RAK1-0 V6 amp installation kit. It includes 17 ft of 1/0 AWG CCA power wire, 3 ft of 1/0 AWG CCA ground wire, 17 ft of 18 AWG remote turn-on wire, and a 17 ft V6 noise-rejecting woven coaxial RCA cable. A proprietary V8 ANL fuse holder with a 150A fuse plus nickel-plated ring and spade terminals support systems rated up to 2400W. Confirm CCA cable and fuse sizing for the amplifier before installation.
$154.99 -
AudioControl ACR-3 Dash Remote Level Control
The AudioControl ACR-3 adds remote level control for compatible AudioControl processors and amplifiers, including DM-series DSP units and several matrix amplifiers. It ships with a 20-foot cable and a removable mounting enclosure for custom dash installations. Confirm your model against the official compatibility list—ACR-3 is not the same remote as ACR-1 or ACR-E.
$49.00 -
AudioControl ACR-1 Dash Remote Level Control
The AudioControl ACR-1 adds precise remote level control to compatible AudioControl processors and amplifiers so you can adjust from the driver’s seat. It is the replacement remote for The Epicenter and ships with a 20-foot remote cable plus a metal housing with integrated mounting tabs that can be removed for custom flush-mount installs. Confirm compatibility with your specific AudioControl model before ordering.
$79.00 -
Jensen CAR1013R 10.1″ Receiver with IllumiNITE Light Ring
The Jensen CAR1013R is a 10.1″ multimedia receiver with wireless Apple CarPlay and wireless Android Auto in a Halo / floating-style chassis. It adds wireless Apple CarPlay and Android Auto plus IllumiNITE RGB light-ring and button illumination. The display is listed at 1024×600. Mechless chassis suits vehicles that need a large floating-style screen without a disc mechanism. Confirm dash clearance for the halo bezel before ordering. Install hardware is sold separately.
$399.99 -
AudioControl ACR-E EPIC Series Dash Remote
The AudioControl ACR-E dash remote knob is designed for AudioControl EPIC Series amplifiers only. It provides wired remote level control from the driver’s seat and includes the remote, cable, and screws. Listed as EPICKNOB; official model is ACR-E. Do not use ACR-E as a substitute for ACR-1, ACR-2, or ACR-3 on non-EPIC products.
$49.99 -
LINKSWELL XLDGOP156RR6H
The Linkswell XLDGOP156RR6H (Linkswell model XL-DGOP15-6RR-6H) is a T-Style XL radio that replaces the factory head unit in 2013–2018 Ram trucks and 2019–2024 Ram Classic models with a 15.6″ HD Android touchscreen. It adds wireless Apple CarPlay, wired or wireless Android Auto, Wi‑Fi apps, and an on-screen X-KNOB for volume, fan speed, and temperature. The 2019–2024 new-body Ram uses a different Linkswell XL model.
$1,995.95LINKSWELL XLDGOP156RR6H
$1,995.95 -
AudioControl AC-LGD Load Generating Device Pair
The AudioControl AC-LGD is a load generating device sold as a pair with connection wires. Carefully selected resistors and a Zobel network help generate load and stabilize signals from modern Class D factory amplifiers when speakers are removed, reducing mute, distortion, or damaging frequency issues into aftermarket line converters or amplifiers. Each pair uses standard wire colors for front and rear connections.
$69.00 -
Kenwood KMM-BT332U Bluetooth Media Receiver with Alexa
The Kenwood KMM-BT332U is a single-DIN digital media receiver with built-in Bluetooth and Amazon Alexa support through the Alexa app on your phone. A front USB port plays FLAC files up to 96 kHz/24-bit, and a front AUX input adds another source. Three 2.5-volt preouts, a 13-band EQ with time alignment, variable color illumination and SiriusXM readiness give it room to grow. It is a mechless unit with a short chassis and no CD drive.
$129.99 -
AudioControl Epicenter Micro PRO Bass LOC
The AudioControl Epicenter Micro PRO combines legendary Epicenter bass restoration with line-output conversion features for factory upgrades. Load selection, GTO and audio-sense turn-on, and up to 10 V maximum output help feed amplifiers a strong signal, while a conformally coated PCB adds durability. The ACR-4 remote is included for dash control of the Epicenter effect.
$249.00
