Rockford Fosgate M5-1500X5 1500W 5-Channel Element Ready Amp
IPX6 five-channel marine and powersports amplifier with sub channel
$999.99
Overview
The M5-1500X5 is a 1,500-watt 5-channel Element Ready amplifier for boats, UTVs, and other exposed installs. Front and rear channels use Class-AD topology, while the sub channel is Class-BD. Constant Power, C.L.E.A.N. clip LEDs, IPX6 seals, and PRESET mode for Rockford UTV kits round out the package for all-day listening. Plan charging capacity and wire gauge for a full 1,500-watt Class-AD/BD load.
Product details
Five channels for full-range and bass
When a marine or UTV system needs four speakers and a sub from one chassis, the M5-1500X5 is Rockford Fosgate’s answer. CTA-2006 continuous power is 100 watts × 4 plus 400 watts × 1 at 4 ohms, rising to 100 × 4 + 600 × 1 at 2 ohms on the sub channel, with a 1-ohm sub rating of 600 watts. Dynamic PowerCube figures climb higher still. Total rated power is 1,500 watts.
Class-AD fronts, Class-BD sub
Front and rear channels use proprietary Class-AD topology for strong output with lower current draw. The dedicated sub channel is Class-BD, aiming for 75–80% efficiency versus traditional Class A/B. Patented Constant Power can boost output by up to 25% as impedance shifts. C.L.E.A.N. input and output clip LEDs simplify gain setting, and Discrete Surface Mount parts tighten tolerances.
Element Ready and PRESET
An IPX6-rated chassis with integrated harness and panel seals is built for spray, dust, and vibration. PRESET mode removes setup steps when the amp is paired with Rockford Fosgate UTV audio kits. Low-level RCA and high-level inputs cover OEM and aftermarket sources, with remote-out on high-level. Plan charging capacity and wire gauge for a full 1,500-watt Class-AD/BD load before you mount the amp.
Key features
- 1,500-watt 5-channel Element Ready amplifier with IPX6-rated chassis
- CTA-2006 power: 100 W × 4 + 400–600 W sub depending on load
- Class-AD topology on front and rear channels for efficient full-range power
- Class-BD sub channel targets 75–80% efficiency versus traditional A/B
- Constant Power can boost output up to 25% across varying loads
- C.L.E.A.N. input and output clip detection with indicator LEDs
- PRESET mode simplifies setup with Rockford Fosgate UTV audio kits
Specifications
| Weight | 6 lbs |
|---|---|
| Dimensions | 12.3 × 4.25 × 1.7 in |
| Channels | 5 channel |
| Brand | Rockford Fosgate |
| Model | M5-1500X5 |
| SKU | M51500X5 |
| Product type | Amplifier |
| Total Power | 1500 Watts |
| Rated Power (CTA-2006) | 100 W × 4 + 400 W × 1 @ 4 Ω; 100 W × 4 + 600 W × 1 @ 2 Ω; 600 W × 1 @ 1 Ω sub; 200 W × 2 bridged @ 4 Ω |
| Dynamic Power (PowerCube) | 125 W × 4 + 400 W × 1 @ 4 Ω; 200 W × 4 + 700 W × 1 @ 2 Ω; 700 W × 1 @ 1 Ω sub; 400 W × 2 bridged @ 4 Ω |
| Bridgeable | Yes (front/rear) |
| Frequency Response | 10 Hz – 50 kHz |
| Input Sensitivity | 150 mVrms – 12 Vrms |
| Circuit Topology | Class-AD (front/rear); Class-BD (sub) |
| Element Ready Rating | IPX6 |
Important notes
- Designed for marine and powersports use — verify your electrical system can support the load
- Use appropriately sized power, ground, and speaker wire for a 1,500-watt amplifier
- PRESET mode is intended for Rockford Fosgate UTV kits; manual tuning remains available
- Professional installation is recommended for sealed harness and panel connections
What's in the box
- M5-1500X5 Element Ready 5-channel amplifier
- Integrated wiring harness components as supplied by Rockford Fosgate
- Mounting hardware
