-
Rockford Fosgate R2D2-12 Prime R2 12″ Dual 2-Ohm Sub
Build Prime bass with the Rockford Fosgate R2D2-12, a 12-inch dual 2-ohm subwoofer rated 250 watts RMS and 500 watts max. A mica-reinforced polypropylene cone, StampCast basket with spider venting, and linear spider with embedded tinsel leads support sealed or vented installs. Dual 2-ohm coils wire to 1-ohm or 4-ohm loads. Anodized aluminum voice coil formers and 12-AWG compression terminals round out the package.
$119.99 -
Rockford Fosgate P2P3G-15 Punch P2/P3 15″ Mesh Grille
Protect a Punch P2 or P3 15-inch woofer with the Rockford Fosgate P2P3G-15 stamped mesh grille insert. It seats into the Gen-3 cast aluminum trim ring that ships with select Punch P2 and P3 15-inch subwoofers. The mesh helps guard the cone and surround from cargo and accidental contact. Sold as a grille insert only; the subwoofer and trim ring are not included.
$44.99 -
Rockford Fosgate P1S2-12 Punch 12″ 2-Ohm SVC Subwoofer
Wire a mono amp for low impedance with the Rockford Fosgate P1S2-12, a 12-inch single 2-ohm Punch P1 subwoofer rated 250 watts RMS and 500 watts max. A Kevlar-fiber-reinforced paper cone, StampCast basket, and linear spider suit sealed or vented boxes. Mounting depth is 6.0 inches. A soft-touch ABS trim ring is included; the optional grille insert is sold separately.
$129.99 -
Rockford Fosgate P1G-15 Punch P1 15″ Stamped Mesh Grille
The Rockford Fosgate P1G-15 is a stamped mesh grille insert sized for Gen-3 Punch P1 15-inch subwoofers. It seats in the matching P1 trim ring to help protect the cone and surround from cargo and accidental contact in open trunks or truck beds. The grille is sold as an accessory only; the subwoofer, trim ring, and mounting hardware are not included with this listing.
$44.99 -
Rockford Fosgate P1G-12 Punch P1 12″ Grille Insert
Add cone and surround protection to a Gen-3 Punch P1 12-inch subwoofer with the Rockford Fosgate P1G-12 stamped mesh grille insert. It seats in the soft-touch ABS trim ring that ships with Gen-3 P1 woofers. Useful in open enclosures or anywhere the cone may see casual contact. Sold as a single insert; the subwoofer and trim ring are not included.
$34.99 -
Rockford Fosgate P1675-S Punch 6.75″ Component Speaker System
The Rockford Fosgate P1675-S Punch component system separates the midbass and the highs for a cleaner stage in the doors. You get a pair of 6.75-inch woofers, 1-inch PEI soft-dome tweeters, integrated basket crossovers, and matching grilles. Each side is rated 60 watts RMS / 120 watts max into 4 ohms, with FlexFit baskets and butyl rubber surrounds for everyday door installs.
$159.99 -
Rockford Fosgate P152S Punch 5.25″ Twin-Drive Coaxial Speakers
The Rockford Fosgate P152S is a Punch 5.25-inch twin-drive full-range speaker set rated at 60 watts RMS and 120 watts max into 4 ohms. Each speaker uses a mica-injected polypropylene cone with a polyurethane surround and twin 0.75-inch aluminum dome tweeters for flexible mounting. A compact 12 dB audiophile passive network, concealing ring, removable motor cover, and grilles are included. Mounting depth is 2.5 inches.
$129.99$159.99 -
Rockford Fosgate DSR1 Digital Signal Processor with Maestro
The DSR1 combines a full-featured 3Sixty-class digital signal processor with a flashable iDatalink Maestro integration module. Use it out of the box on high- or low-level inputs, or flash vehicle-specific firmware to keep factory controls. Eight RCA outputs, 245 bands of EQ, adjustable crossovers, and up to 10 ms of delay per channel are tuned with Rockford Fosgate PerfectTune software.
$419.99 -
Rockford Fosgate RFK-HD14M5 Harley Amp Install Kit
Wire an M5-series amp into a supported Harley with the Rockford Fosgate RFK-HD14M5 Gen-3 installation kit. It is built for select 2014–2023 Road Glide, Street Glide, Ultra, and CVO models and includes 8 AWG power and ground cable, 16 AWG speaker wire, and a MAXI fuse holder sized at 60 Amp. The amplifier, source unit, and speakers are sold separately.
$369.99 -
Rockford Fosgate HD24BL69 6×9″ Baglid Kit for 2024+ Harley
The HD24BL69 is a 6×9-inch aftermarket saddlebag cut-in speaker kit for 2024+ Harley-Davidson touring bikes. It includes TMS24-69 Element Ready speakers, left and right cutting templates, mechanical buckets and backers, baglid grilles, and wiring harnesses. Higher speaker mounting preserves bag space, and the sealed U-channel design fights water intrusion. Professional baglid cutting and sealing is strongly recommended for a watertight install.
$849.99 -
Rockford Fosgate HD24-STG3 Stage-3 Kit for 2024+ Harley
The HD24-STG3 is a Stage-3 aftermarket audio kit purpose-built for 2024+ Harley-Davidson touring motorcycles. It pairs TMS24-65 6.5-inch fairing speakers with an HD24BL69 6×9 baglid cut-in kit, a TMA-1000X4I 1,000-watt 4-channel A2B amplifier, and the RFK-HD24 installation kit. Element Ready drivers and OEM connectors keep the upgrade plug-and-play. Confirm your bike is a 2024+ Harley-Davidson touring model compatible with this package.
$2,449.99 -
Rockford Fosgate HD24-STG2 Stage-2 Kit for 2024+ Harley
The HD24-STG2 is a Stage-2 aftermarket audio kit purpose-built for 2024+ Harley-Davidson touring motorcycles. It pairs TMS24-65 6.5-inch Element Ready fairing speakers and grilles with a TMA-1000X4I 1,000-watt 4-channel A2B amplifier and full-spec installation cable. OEM connectors keep the upgrade plug-and-play, with a clear path to Stage-3 bag speakers later. Confirm your bike is a 2024+ Harley-Davidson touring model compatible with this package.
$1,599.99