AudioControl EPIC750 Mono Amplifier 750W RMS
Class D monoblock with ACR-E remote and Epicenter Link
$205.00
Overview
The AudioControl EPIC750 is a compact Class D monoblock subwoofer amplifier rated for 750 watts RMS at 1 ohm, 500 watts at 2 ohms, and 300 watts at 4 ohms (14.4 V). It includes the ACR-E remote level control, an Epicenter Link harness, variable low-pass and subsonic filters, and EPICBoost bass EQ. Pair it with a separately sold Epicenter processor when you want bass restoration in the same system.
Product details
Compact Class D power for subwoofers
EPIC750 is built as a high-current Class D monoblock that stays stable down to a 1 ohm load. At 14.4 volts AudioControl rates continuous output at 300 watts into 4 ohms, 500 watts into 2 ohms, and 750 watts into 1 ohm, with a strapped rating of 1500 watts into 2 ohms when two amps are linked. Frequency response is 10 Hz to 190 Hz, and the signal-to-noise ratio is 92.2 dBa referenced to 300 watts at 4 ohms.
Filters, EPICBoost, and remote level
A 12 dB/octave Linkwitz-Riley low-pass filter sweeps from 40 Hz to 180 Hz, and a matching subsonic filter runs from Off to 50 Hz. EPICBoost lets you set a bass center between 30 Hz and 80 Hz with up to 12 dB of gain. Line-level inputs accept 500 mV to 12 V RMS, and the included ACR-E dash remote adjusts level from the driver’s seat.
Install details that matter
Power and ground need 4 AWG wire with a 80 amp fuse. Speaker terminals take up to 8 AWG. The chassis measures 8.62 inches long by 6.1 inches wide by 2.01 inches high without connectors. An Epicenter Link harness in the box ties the amp’s power and remote to a separately sold Epicenter bass restoration processor. Hex-screw terminals and a smart auto-reset protection suite cover over-current, over/under voltage, DC offset, and over-temperature faults.
Key features
- Class D monoblock rated 750 W RMS at 1 ohm, 500 W at 2 ohms, 300 W at 4 ohms
- Strappable to 1500 W RMS at 2 ohms when two EPIC750 amplifiers are linked
- 12 dB/octave Linkwitz-Riley low-pass filter adjustable from 40 Hz to 180 Hz
- Variable subsonic filter from Off to 50 Hz protects unloaded subwoofer travel
- EPICBoost bass EQ with 30–80 Hz center frequency and 0–12 dB of gain
- ACR-E wired remote level control and cable included in the box
- Epicenter Link harness connects power and remote to a sold-separately Epicenter
- 4 AWG power terminals, 8 AWG speaker terminals, and hex-screw hardware
- Smart auto-reset protection for current, voltage, DC offset, and temperature
Specifications
| Weight | 6.0 lbs |
|---|---|
| Dimensions | 8.41 × 4.25 × 1.7 in |
| Channels | Mono |
| Series | EPIC |
| Model | EPIC750 |
| SKU | EPIC750 |
| UPC | 850038647759 |
| Product type | Monoblock subwoofer amplifier |
| Amplifier class | Class D |
| RMS power @ 4 ohm | 300 W x 1 @ 14.4 V |
| RMS power @ 2 ohm | 500 W x 1 @ 14.4 V |
| RMS power @ 1 ohm | 750 W x 1 @ 14.4 V |
| Strapped power | 1500 W @ 2 ohm (two amps) |
| Frequency response | 10 Hz – 190 Hz (±1 dB) |
| Signal-to-noise | 92.2 dBa, ref 300 W @ 4 ohm |
| Low-pass filter | 12 dB/oct Linkwitz-Riley, 40–180 Hz |
| Subsonic filter | 12 dB/oct Linkwitz-Riley, Off–50 Hz |
| EPICBoost | 30–80 Hz center, 0–12 dB gain |
| Line-level inputs | 500 mV – 12 V RMS |
| Remote level control | ACR-E included |
| Epicenter Link | Included (1 m harness) |
| Power wire gauge | 4 AWG |
| Speaker wire gauge | 8 AWG |
| Recommended fuse | 80 A |
| Chassis dimensions | 8.62 in L x 6.1 in W x 2.01 in H |
| Warranty | 1 year manufacturer |
Important notes
- The Epicenter bass restoration processor is sold separately; only the Epicenter Link harness is included.
- Requires 4 AWG power/ground and a 80 amp fuse within recommended distance of the battery.
- Chassis dimensions exclude connectors; confirm mounting clearance for terminals and wiring.
What's in the box
- AudioControl EPIC750 monoblock amplifier
- ACR-E remote level control and cable
- The Epicenter Link harness (1 meter)
- Hex wrench
- Mounting screws
- Owner’s manual and warranty information
