Kenwood KFC-P710PS 6.5″ Component Car Speakers
6-1/2-inch component speakers with soft-dome tweeters and in-line networks
$179.99
Overview
The Kenwood KFC-P710PS is a 6-1/2-inch 2-way component speaker system with two woofers and two 1-inch soft-dome tweeters. Each woofer uses an injection-molded polypropylene cone with Kenwood’s Diamond Array Pattern and a rubber surround. The system handles 80 watts RMS (CEA) and 280 watts peak at 4 ohms, with 86 dB sensitivity and a 63 Hz to 24 kHz response. Woofer cutout is 4-15/16 inches, and mounting depth is 2-3/16 inches. Grilles and in-line networks are included.
Product details
Component system layout
The KFC-P710PS pairs two 6-1/2-inch (oversized 160 mm) injection polypropylene woofers with two 1-inch (25 mm) soft-dome tweeters. The woofer cones use Kenwood’s Diamond Array Pattern, a rubber surround, a black steel basket and a ferrite magnet. Each tweeter uses a neodymium magnet and ships ready for flush or surface mounting with the included cups and brackets.

Power, crossover and response
Kenwood rates the system at 80 watts RMS (CEA) and 280 watts peak at 4 ohms. Sensitivity is 86 dB at 1 watt/1 meter, and frequency response runs from 63 Hz to 24 kHz. An in-line network on each channel crosses over at 4,900 Hz, so the soft-dome tweeters only see the high band while the woofers cover the midrange and bass.
Mounting options
Woofer cutout is 4-15/16 inches (126 mm), and mounting depth is 2-3/16 inches (56 mm). Without the grille each woofer measures 6-1/4 inches across; with the grille the frame is 7-1/16 inches. The pack includes flush-mount and free-mount tweeter hardware, GM brackets, grille holders and butyl rubber for sealing around the install.
What’s in the box
Besides the woofers and tweeters, Kenwood includes grilles, grille holders, in-line networks, tweeter brackets, free-mount and flush-mount cups, GM brackets, screw and speed-nut sets, wing nuts and butyl rubber. Gross weight for the packed system is 6.2 lb (2.8 kg). Check the cutout and depth against your doors or dash before you install.

Key features
- 6-1/2-inch 2-way component speaker system from Kenwood USA
- Injection polypropylene woofers with Diamond Array Pattern and rubber surrounds
- 1-inch soft-dome tweeters with neodymium magnets on each
- In-line networks with a 4,900 Hz crossover frequency
- Handles 80 watts RMS (CEA) and 280 watts peak at 4 ohms
- Sensitivity of 86 dB and frequency response from 63 Hz to 24 kHz
- Woofer cutout 4-15/16 inches; mounting depth 2-3/16 inches (56 mm)
- Grilles, flush and free-mount tweeter hardware and GM brackets included
Specifications
| Weight | 6.2 lbs |
|---|---|
| Dimensions | 8.5 × 7 × 16.1 in |
| Size | 6.5 inch |
| Speaker Type | Component |
| Brand | Kenwood |
| Model | KFC-P710PS |
| Product type | 6-1/2" 2-way component speaker system |
| Woofer | 6-1/2 in (oversized 160 mm) injection PP cone, Diamond Array Pattern, rubber surround |
| Tweeter | 1 in (25 mm) soft dome, neodymium magnet |
| Basket | Steel (black) |
| Woofer magnet | Ferrite, 330 g (11.7 oz) |
| RMS power | 80 W (CEA) |
| Peak power | 280 W |
| Impedance | 4 ohms |
| Sensitivity | 86 dB (1 W/1 m) |
| Frequency response | 63 Hz – 24 kHz |
| Crossover | 4,900 Hz (in-line network) |
| Woofer cutout | 4-15/16 in (126 mm) |
| Woofer mounting depth | 2-3/16 in (56 mm) |
| Gross weight | 6.2 lb (2.8 kg) |
Important notes
- Woofer mounting depth is 2-3/16 inches (56 mm). Check the space behind the mounting location before installing.
- Confirm that your vehicle opening matches the 4-15/16 inch woofer cutout, or use the included multi-application rings where they fit.
- These are 4-ohm speakers. Match them to an amplifier or head unit that can drive a 4-ohm load.
What's in the box
- Kenwood KFC-P710PS woofers (2)
- Soft-dome tweeters (2)
- Grilles (2)
- Grille holders (2)
- In-line networks (2)
- Tweeter brackets
- Free-mount cups (2)
- Flush-mount cups (2)
- GM brackets (2)
- Screw set (as packed)
- Speed nuts (as packed)
- Wing nuts M5 (2)
- Butyl rubber (1)

