Rockford Fosgate P1V2-3 Punch P1 3.5″ 3-Way Coaxial Speakers
Punch P1 3.5-inch three-way coaxials with bass blockers
$179.99
Overview
The Rockford Fosgate P1V2-3 is a pair of Punch P1 3.5-inch 3-way coaxials rated at 75 watts RMS and 150 watts peak into 4 ohms. Each speaker pairs a compact midrange with a 3/4-inch Tetolon inverted-dome tweeter and a co-witnessed piezo for clearer highs in dash and door openings. Twist-lock adaptors, 33 µF bass blockers, a cutout template, and mounting hardware are included. Grilles are sold separately.
Product details
3.5-inch Punch for tight spaces
When the factory opening is only 3.5 inches, you still want more than a paper single-cone. The P1V2-3 brings Punch P1 3-way design into that cutout with a mica-reinforced polypropylene midrange, 3/4-inch Tetolon inverted-dome tweeter, and 3/8-inch co-witnessed piezo. Rockford Fosgate rates the pair at 75 watts RMS and 150 watts peak into 4 ohms, with response from 98 Hz to 25 kHz and 82 dB sensitivity (1 W/1 m). A midrange bass blocker at 1,200 Hz @ 6 dB/octave (33 µF) helps keep deep bass off the small cone.
Adaptors and ICC+
Universal twist-lock adaptors and a cutout template make marking and seating straightforward. An ICC+ concealed 6 dB/octave high-pass at 9 kHz steers the tweeter without an external box. Updated mounting flanges help in many current dash and door locations. Confirm your specific cutout and depth against the dimensions in the Specifications section before cutting panels.
In the kit
Two 3.5-inch 4-ohm coaxials, twist-lock adaptors, 33 µF bass-blocker capacitors, a cutout template, screws, wire leads, and crimp connectors. Grilles are not included. Use these for mid/high duty and add separate midbass drivers when you want stronger low end from the doors. Confirm your head unit or amp can deliver clean power near the 75-watt RMS rating for best results.
Key features
- Pair of 3.5-inch Punch P1 3-way coaxial speakers, 4 ohm
- 75 watts RMS / 150 watts peak power handling for the set
- 3/4-inch Tetolon inverted-dome tweeter plus co-witnessed 3/8-inch piezo
- Built-in midrange bass blocker at 1,200 Hz @ 6 dB/octave
- Universal twist-lock adaptors and cutout template in the box
- Frequency response 98 Hz – 25 kHz; 82 dB sensitivity (1 W/1 m)
- ICC+ internal 6 dB/octave concealed crossover network onboard
- Includes screws, wire leads, and crimp connectors for install
- Grilles sold separately; speakers ship as a matched pair
Specifications
| Weight | 3.5 lbs |
|---|---|
| Dimensions | 10.75 × 6 × 4.5 in |
| Size | 3.5 inch |
| Speaker Type | Coaxial |
| Brand | Rockford Fosgate |
| Model | P1V2-3 |
| SKU | P1V23 |
| Product type | Speakers |
| Midrange Size (Nominal Diameter) | 3.5" |
| Tweeter Size (Nominal Diameter) | 3/4" (19 mm) inverted dome |
| Piezo Size (Nominal Diameter) | 3/8" (9 mm) co-witnessed convex |
| Nominal Impedance | 4 ohm |
| Power Handling (RMS) | 75 Watts RMS / 150 Watts Peak |
| Frequency Response | 98 Hz – 25 kHz |
| Sensitivity (1W/1M) | 82 dB |
| Crossover | Tweeter HP 9 kHz @ 6 dB/octave; midrange bass blocker 1,200 Hz @ 6 dB/octave (33 µF) |
| Voice Coil Diameter | 1" (25.4 mm) |
| Cutout Diameter | 2.87" (73 mm) |
| Front Side Clearance | 0.53" (13.4 mm) |
| Grille/Trim Ring Included | No |
| Mounting Hardware | Yes |
| Shipping Weight | 3.5 lbs (1.59 kg) |
Important notes
- Sold as a matched pair for mid/high duty in compact openings. Separate midbass drivers are recommended for deep bass.
- An amplifier and grilles are not included.
- Confirm your cutout and mounting depth against the dimensions in the Specifications section before installation.
- Use the included bass blockers as directed to protect the compact midranges.
What's in the box
- (2) 3.5-inch 4-ohm 3-way coaxial speakers
- (2) twist-lock speaker adaptors
- (1) speaker cutout template
- (2) 33 µF non-polarized bass-blocker capacitors
- Mounting screws, wire leads, and crimp connectors
