Rockford Fosgate P1T-S Punch 1″ Soft Dome Tweeter Kit
Punch 1-inch PEI dome tweeter kit with flush and surface mounts
$89.99
Overview
The Rockford Fosgate P1T-S Punch tweeter kit adds clear highs when your factory speakers fall off early. The pair of 1-inch PEI soft-dome tweeters is rated 60 watts RMS / 120 watts max into 4 ohms, covering 3.5 kHz to 22 kHz at 90 dB. High-pass crossovers and flush, surface, and angle bezels ship in the carton for flexible installs.
Product details
Punch soft-dome tweeter kit
The P1T-S is Rockford Fosgate’s Punch 1-inch PEI soft-dome tweeter kit for natural high-frequency detail when the factory speakers roll off early. Power handling is 60 watts RMS / 120 watts max into 4 ohms. Frequency response is 3.5 kHz to 22 kHz with 90 dB sensitivity (1 W/1 m). Tweeter mounting depth is only 0.50 inches, and the recessed flush mount uses a standard 1-3/4-inch hole saw for a clean panel install.
Three bezel styles in the box
Each kit includes high-pass crossovers at 3.5 kHz with a 12 dB/octave Butterworth slope, plus bezels for flush, surface, and angle mounting so you can aim the tweeters toward the listener. Grilles and mounting hardware are included. Sold as a matched pair—ready to bi-amp or to run from a dedicated tweeter channel on a Punch amplifier near the 60-watt RMS rating.
Key features
- Punch 1-inch PEI soft-dome tweeter kit sold as a matched pair
- 60 watts RMS / 120 watts max power handling at 4 ohms
- 3.5 kHz high-pass crossovers at 12 dB per octave Butterworth
- Flush, surface, and angle bezels included for flexible aiming
- Recessed flush mount accepts a standard 1-3/4-inch hole saw
- Only 0.50 inches of tweeter mounting depth for tight panels
- Grilles and mounting hardware included with the kit
Specifications
| Weight | 1.2 lbs |
|---|---|
| Dimensions | 10.5 × 10.25 × 2.5 in |
| Size | 1 inch |
| Speaker Type | Tweeters |
| Brand | Rockford Fosgate |
| Model | P1T-S |
| SKU | P1TS |
| Product type | Speakers |
| Tweeter Size (Nominal Diameter) | 1.0" (25.4 mm) |
| Nominal Impedance | 4 ohm |
| Frequency Response | 3.5 kHz – 22 kHz |
| Sensitivity (1 W/1 m) | 90 dB |
| Power Handling | 60 W RMS / 120 W Max |
| Crossover | High-pass 3.5 kHz @ 12 dB/octave Butterworth |
| Tweeter Mounting Depth | 0.50" (13 mm) |
| Grille/Trim Ring Included | Yes |
| Mounting Hardware | Yes |
| Shipping Weight | 1.2 lbs (0.54 kg) |
Important notes
- Sold as a pair of 4-ohm Punch PEI soft-dome tweeters with crossovers
- Flush, surface, and angle bezels plus grilles ship in the box
- Verify 0.50-inch mounting depth and hole-saw size before ordering
- Use a dedicated tweeter channel or crossover near 3.5 kHz for best results
What's in the box
- (2) 1" PEI soft-dome tweeters
- (2) High-pass crossovers
- Flush, surface, and angle mounting bezels
- Grilles and mounting hardware
