Pioneer TS-D12D4 12″ D-Series Dual 4-Ohm Subwoofer
600 W RMS aramid-fiber IMPP sub with dual 4-ohm coils
$179.99
Overview
The Pioneer TS-D12D4 is a 12-inch D-Series dual 4-ohm subwoofer rated 600 W RMS and 2,000 W peak. An aramid-fiber infused IMPP cone and butyl rubber surround deliver 20 Hz to 4.7 kHz at 78 dB with 13 mm Xmax. Mounting depth is 6-1/8 inches with sealed and ported volumes listed at 1.0 cu. ft.
Product details
D-Series 12-inch DVC output
TS-D12D4 scales the D-Series formula to 12 inches with 600 W RMS / 2,000 W peak. Dual 4-ohm coils let you wire for common mono-amp loads without a second woofer.
Aramid IMPP and butyl surround
Aramid-fiber infused IMPP stiffens the cone for punchy, controlled bass, while the butyl surround supports long travel. Fs is 34 Hz with 13 mm Xmax across 20 Hz to 4.7 kHz at 78 dB.
1.0 cu. ft. boxes and 6-1/8-inch depth
Pioneer lists 1.0 cu. ft. for both sealed and ported starting points. Mounting depth is 6-1/8 inches. Confirm cavity space and feed the woofer near 600 W RMS.
Key features
- 12-inch D-Series dual 4-ohm voice coil subwoofer
- 600 watts RMS and 2,000 watts peak power handling
- Aramid-fiber infused IMPP cone
- Butyl rubber surround
- Fs 34 Hz; Xmax 13 mm; sensitivity 78 dB
- Frequency response of 20 Hz to 4.7 kHz
- Recommended sealed 1.0 cu. ft.; ported 1.0 cu. ft.; depth 6-1/8 in
Specifications
| Weight | 13.5 lbs |
|---|---|
| Dimensions | 14.5 × 14.5 × 8.75 in |
| Size | 12 inch |
| Brand | Pioneer |
| Model | TS-D12D4 |
| SKU | TSD12D4 |
| UPC | 884938374408 |
| Product type | Subwoofer |
| Voice Coil | Dual 4-ohm |
| RMS Power | 600 W |
| Peak Power | 2000 W |
| Impedance | Dual 4 ohms |
| Sensitivity (1W/1M) | 78 dB |
| Frequency Response | 20 Hz to 4.7 kHz |
| Mounting Depth | 6-1/8" |
| Cone Material | Aramid-fiber IMPP |
| Xmax | 13 mm |
| Fs | 34 Hz |
| Surround | Butyl rubber |
| Sealed Box Volume | 1.0 cu. ft. |
| Ported Box Volume | 1.0 cu. ft. |
Important notes
- D-Series 12-inch dual 4-ohm woofer sold individually — plan a matching enclosure and amp.
- Wire dual 4-ohm coils for the final load your amplifier supports.
- Confirm 6-1/8-inch depth and enclosure volume before building.
What's in the box
- Pioneer TS-D12D4 subwoofer
