Pioneer TS-D10D4 10″ D-Series Dual 4-Ohm Subwoofer
500 W RMS aramid-fiber IMPP sub with dual 4-ohm coils
$159.99
Overview
The Pioneer TS-D10D4 is a 10-inch D-Series dual 4-ohm subwoofer rated 500 W RMS and 1,500 W peak. An aramid-fiber infused IMPP cone and butyl rubber surround deliver 20 Hz to 6.6 kHz response at 76 dB with 11 mm Xmax. Mounting depth is 5-1/2 inches with sealed and ported volumes near 0.7 cu. ft.
Product details
D-Series 10-inch DVC performance
TS-D10D4 moves into Pioneer’s D-Series with 500 W RMS / 1,500 W peak on dual 4-ohm coils. Dual coils give you parallel or series options for common mono amplifiers.
Aramid-fiber IMPP cone
Injection Molded Polypropylene infused with aramid fibers stiffens the cone for precise low notes. A butyl rubber surround supports long travel, with Fs at 41 Hz and 11 mm Xmax across 20 Hz to 6.6 kHz at 76 dB.
Enclosure guidance
Pioneer lists about 0.7 cu. ft. sealed and 0.69 cu. ft. ported. Mounting depth is 5-1/2 inches. Match the box to those volumes and feed the woofer near 500 W RMS.
Key features
- 10-inch D-Series dual 4-ohm voice coil subwoofer
- 500 watts RMS and 1,500 watts peak power handling
- Aramid-fiber infused IMPP cone
- Butyl rubber surround
- Fs 41 Hz; Xmax 11 mm; sensitivity 76 dB
- Frequency response of 20 Hz to 6.6 kHz
- Recommended sealed ~0.7 cu. ft.; ported ~0.69 cu. ft.; depth 5-1/2 in
Specifications
| Weight | 10.4 lbs |
|---|---|
| Dimensions | 12 × 12 × 8.25 in |
| Size | 10 inch |
| Brand | Pioneer |
| Model | TS-D10D4 |
| SKU | TSD10D4 |
| UPC | 884938374361 |
| Product type | Subwoofer |
| Voice Coil | Dual 4-ohm |
| RMS Power | 500 W |
| Peak Power | 1500 W |
| Impedance | Dual 4 ohms |
| Sensitivity (1W/1M) | 76 dB |
| Frequency Response | 20 Hz to 6.6 kHz |
| Mounting Depth | 5-1/2" |
| Cone Material | Aramid-fiber IMPP |
| Xmax | 11 mm |
| Fs | 41 Hz |
| Surround | Butyl rubber |
| Sealed Box Volume | 0.7 cu. ft. |
| Ported Box Volume | 0.69 cu. ft. |
Important notes
- D-Series 10-inch dual 4-ohm woofer sold individually; box and amp are not included.
- Wire dual 4-ohm coils for the final load your amplifier supports.
- Confirm mounting depth and enclosure volume before cutting or building.
What's in the box
- Pioneer TS-D10D4 subwoofer
