Rockford Fosgate P1V2-4 Punch P1 4″ 3-Way Coaxial Speakers
Punch P1 4-inch three-way coaxials with twist-lock adapters
$179.99
Overview
The Rockford Fosgate P1V2-4 Punch P1 pair brings a true 4-inch three-way coaxial upgrade to doors and kick panels that simply cannot take a larger woofer. Each speaker is rated 75 watts RMS / 150 watts peak into 4 ohms, with a 3/4-inch Tetolon inverted-dome tweeter, a co-witnessed piezo super tweeter, a mica-reinforced cone, and vehicle-specific twist-lock adapters for many modern factory openings.
Product details
Compact Punch P1 three-way
When the opening is only four inches across, the P1V2-4 is Rockford Fosgate’s Punch P1 answer. The pair is rated 75 watts RMS / 150 watts peak into 4 ohms, covering 75 Hz to 25 kHz with 85 dB sensitivity (1 W/1 m) and 88 dB at 2.83 V/1 m. A 1-inch voice coil drives the mica-reinforced curvilinear cone while the Tetolon inverted dome and 3/8-inch polypropylene piezo handle the top end on the same axis.
Adapters for modern openings
Updated mounting flanges and twist-lock adaptors target today’s factory holes. Cutout diameter is 3.41 inches. Front-loading depth with the twist-lock adaptor is 1.99 inches; rear-loading depth is 1.72 inches, with 0.5 inches of front-side clearance. A built-in 9 kHz tweeter high-pass and a 1,200 Hz bass blocker (33 µF) keep the small cone from fighting deep bass.
Punch P1 mechanical set
Santoprene half-roll surrounds, co-molded cone bonds, Nomex spiders, vented Kapton formers, and a 15% glass-fiber reinforced PA66 basket are the Punch P1 build. Ultra-flexible tinsel leads are stitched to the spider. The carton ships two speakers, a cutout template, 4-tab, 3-tab Tesla/MB, and Jeep twist-lock adaptors, bass-blocker caps, wire pieces, and mounting screws. Grilles are not included.
Key features
- Punch P1 4-inch three-way coaxial speakers sold as a matched pair
- 75 watts RMS / 150 watts peak power handling at 4 ohms
- 3/4-inch Tetolon inverted-dome tweeter for detailed high frequencies
- 3/8-inch polypropylene piezo super tweeter for extended treble
- Mica-reinforced polypropylene cone with a Santoprene half-roll surround
- Vehicle-specific twist-lock adapters for many factory 4-inch openings
- Built-in 9 kHz high-pass and 1,200 Hz bass-blocker network
- Glass-fiber reinforced PA66 basket with Nomex spider and Kapton former
Specifications
| Weight | 3.5 lbs |
|---|---|
| Dimensions | 10.75 × 6 × 4.5 in |
| Size | 4 inch |
| Speaker Type | Coaxial |
| Model | P1V2-4 |
| SKU | P1V24 |
| Product type | Speakers |
| Midrange Size (Nominal Diameter) | 4" |
| Piezo Size (Nominal Diameter) | 3/8" (9 mm) Co-Witnessed Convex |
| Tweeter Size (Nominal Diameter) | 3/4" (19 mm) Inverted Dome |
| Nominal Impedance | 4 ohm |
| Frequency Response | 75 Hz – 25 kHz |
| Voice Coil Diameter | 1" (25.4 mm) |
| Fs | 100 Hz |
| Crossover | Tweeter HP 9 kHz @ 6 dB/oct; Midrange bass blocker 1,200 Hz @ 6 dB/oct (33 µF) |
| Sensitivity (2.83 V/1 m) | 88 dB |
| Sensitivity (1 W/1 m) | 85 dB |
| Power Handling | 75 W RMS / 150 W Peak |
| Cutout Diameter | 3.41" (86.5 mm) |
| Front-Loading Depth (Twist-Lock Adaptor) | 1.99" (50.5 mm) |
| Rear-Loading Depth (Twist-Lock Adaptor) | 1.72" (43.8 mm) |
| Front Side Clearance | 0.5" (12.7 mm) |
| Removable Motor Cover | No |
| Grille/Trim Ring Included | No |
| Mounting Hardware | Yes |
| Shipping Weight | 3.5 lbs (1.59 kg) |
| Brand | Rockford Fosgate |
Important notes
- Sold as a pair of 4-ohm Punch P1 three-way coaxial speakers
- Grilles and trim rings are not included and must be ordered separately if needed
- Twist-lock adapters and 33 µF bass blockers ship in the box for many factory installs
- Verify cutout diameter and mounting depth before ordering for your vehicle
What's in the box
- (2) 4" 4Ω 3-way coaxial speakers
- (1) 4" speaker cutout template
- (2) 4" 4-tab twist-lock adaptors (universal)
- (2) 4" 3-tab twist-lock adaptors (Tesla/MB)
- (2) 4" 3-tab twist-lock adaptors (Jeep)
- (2) 33 µF non-polarized bass-blocker capacitors
- Mounting screws, speaker wire pieces, and crimp connectors
