-
Jensen CAR1013R 10.1″ Receiver with IllumiNITE Light Ring
The Jensen CAR1013R is a 10.1″ multimedia receiver with wireless Apple CarPlay and wireless Android Auto in a Halo / floating-style chassis. It adds wireless Apple CarPlay and Android Auto plus IllumiNITE RGB light-ring and button illumination. The display is listed at 1024×600. Mechless chassis suits vehicles that need a large floating-style screen without a disc mechanism. Confirm dash clearance for the halo bezel before ordering. Install hardware is sold separately.
$399.99 -
Jensen BUCAM400AJ License Plate Backup Camera with Audio
The Jensen BUCAM400AJ is a stainless-steel license-plate style backup camera with a built-in microphone for reverse video plus audio. a 170° viewing angle, CMOS sensor, and IP67 weather rating for exterior plate mounting. RCA A/V outputs connect to a compatible head unit or monitor that accepts camera video and, when wired, microphone audio. Confirm your display supports the audio channel before routing the mic lead. Display and adapters are sold separately.
$39.99$59.99 -
Jensen BUCAM200J Universal Backup Camera with Parking Lines
The Jensen BUCAM200J is a universal surface-mount backup camera with a 170° wide-angle CMOS lens and switchable parking-line overlay. An IP67-rated camera body and roughly 19.6 ft of cable support RCA video hookup to a compatible head unit or monitor. Two-wire 12 V DC power suits reverse-lamp trigger installs. Mounting hardware and the camera body are included; a display is sold separately. Confirm RCA input and reverse trigger wiring for your vehicle before cutting trim.
$39.99 -
Jensen BUCAM350 License Plate Style Backup Camera
The Jensen BUCAM350 is a license-plate style backup camera built for surface mounting at the plate. It uses a wide-angle CMOS sensor, parking-line overlay, and a standard RCA video connection to a compatible receiver or monitor. An IP67-rated exterior body supports outdoor installs when powered from reverse lamps. Plate-style housing helps keep the camera low and centered. A display, harness adapters, and any vehicle-specific plate brackets are sold separately unless already on hand.
$49.99 -
JBL Stage GT 50011 Mono 500 W Amplifier with Bass Remote
Stage GT 50011 is a mono Class-D subwoofer amplifier rated 500 W RMS at 2 ohms and 300 W RMS at 4 ohms. A wired remote, variable phase, and bass EQ with adjustable level, width, and frequency (30–100 Hz) help tune the enclosure. Start/stop and OEM load detect support modern vehicles. Five hundred watts RMS at 2 ohms drives many single or dual-coil subs.
$249.95 -
JBL Stage GT 60041 4-Channel 65 W × 4 Amplifier
Stage GT 60041 is a compact Class-D four-channel amplifier rated 65 W RMS × 4 at 4 ohms, 90 W × 4 at 2 ohms, or 180 W × 2 bridged at 4 ohms. Variable 32–320 Hz crossovers, 0–12 dB bass EQ at 45 Hz, wide input sensitivity, OEM load detect, and start/stop compatibility support factory upgrades. Start/stop compatibility and OEM load detect help the amp behave with newer factory radios. Speaker-level inputs cover 1–25 V.
$229.95 -
JBL Stage 122 12″ Car Audio Subwoofer
Stage 122 is a 12-inch car subwoofer rated 250 W RMS / 1000 W peak at 4 ohms. A polypropylene cone with hi-roll rubber surround targets efficient, durable bass. Sensitivity is 91 dB with 34–200 Hz response and a 2-inch voice coil. Stage 122 brings JBL voicing to entry and mid-level bass builds without SSI or dual-coil complexity — a straightforward 4-ohm single voice coil.
$109.95 -
JBL Stage 1200D Dual 12″ Slot-Ported Subwoofer Enclosure
Stage 1200D loads dual 12-inch Stage subwoofers in a rugged slot-ported MDF enclosure. The system handles 500 W RMS / 1000 W peak at 2 ohms with 94 dB sensitivity and 34–200 Hz response. Carpeted 5/8" MDF construction measures about 30-1/8" W × 15" H × 13-11/16" / 10-1/2" deep. Two Stage 12-inch woofers share a slot-ported enclosure tuned for efficient output without building a custom box.
$399.95 -
JBL Stage3 68CF Gen2 6.5″ Two-Way Component Speakers (No Grille)
Stage3 68CF Gen2 is a 6-1/2-inch two-way component set without grilles for factory grille locations. Plus One glass-fiber reinforced woofers and edge-driven silk dome tweeters handle 95 W RMS / 760 W peak at a true 4-ohm load with 91 dB sensitivity. Laser-etched Plus One woofers with 10% glass fiber aim for deeper bass and a forged carbon look. A true 4-ohm design helps maximize power from head units and amplifiers by accounting for system resistance. Test-fit the baskets in the factory openings and note any depth or magnet clearance issues before final fastening.
$109.95 -
JBL Club 44F 4″ Two-Way Coaxial Speakers (No Grille)
Club 44F is a 4-inch two-way coaxial pair without grilles for factory locations that keep the OEM grille. Plus One woofer architecture and edge-driven silk dome tweeters aim for clear highs and stronger midbass. Rated 35 W RMS / 105 W peak at 3 ohms with 90 dB sensitivity. HARMAN Plus One cones increase effective surface area versus conventional 4-inch woofers, helping output and low-frequency authority in small doors or dash locations.
$99.95 -
JBL BassPro Nano 2 Compact 6×8″ Powered Underseat Subwoofer
BassPro Nano 2 is a compact 6×8-inch underseat powered subwoofer with a built-in Class-D 200 W RMS amplifier. AI Sound Boost adapts output in real time, while a remote, adjustable low-pass filter, and bass boost help tune the cabin. High- and low-level inputs support factory and aftermarket radios. The Nano 2 steps up to 200 W RMS / 400 W max in a die-cast aluminum footprint meant for under-seat installs.
$349.95 -
Pioneer AVH-2550NEX 6.8″ Double-DIN DVD Receiver with Wired CarPlay
The Pioneer AVH-2550NEX pairs a 6.8-inch capacitive touchscreen with a built-in CD/DVD drive, wired Apple CarPlay, and wired Android Auto. HD Radio and SiriusXM-Ready cover broadcast and satellite listening, while iDatalink Maestro helps retain factory features. Six RCA preouts at 4 volts and a 13-band EQ give an external amp room to work.
$649.99