Select your vehicle’s year, make and model to see the Metra, PAC and iDatalink Maestro dash kits, wiring harnesses, antenna adapters and speaker sizes that fit.
The right installation parts are what make a new stereo look and work like it came from the factory. Our install parts help your new receiver, amplifier or speakers fit cleanly and connect properly to your vehicle, using trusted installation brands such as Metra and PAC.
Dash kits mount an aftermarket single or double din stereo in your dash with trim that matches your interior. Wire harnesses connect your new stereo to the factory wiring, so there’s no cutting or splicing of your vehicle’s original wires. Antenna adapters connect your factory antenna to an aftermarket radio so you keep clear AM/FM reception.
Adding an amplifier? Our amp wire kits include the power, ground and signal wiring you need to run your amplifier safely and get the most out of your system.
Not sure which parts fit your vehicle? Bring us your vehicle’s year, make and model, or come in to a store near you, and our installers will help you find the right parts for the job.
-
Stinger SSRCB2M Competition Series RCA Y-Adapter
The Stinger SSRCB2M is a twisted-pair RCA Y-adapter, 2 male to 1 female for splitting or combining RCA signals in a car audio system. 2 male to 1 female split for signal routing. tightly twisted-pair construction aids noise rejection. It is a handy part when you need to feed two amplifier inputs from one output, or bridge a pair of outputs into a single input. Check the plug genders on your equipment before ordering so the adapter matches your setup.
$8.99 -
T-SPEC VFDB4 MANL Fuse Distribution Block 4 Out
Distribute fused power with the T-SPEC VFDB4 MANL distribution block. One 1/0–4 AWG input feeds four 4/8 AWG fused outputs designed for MANL fuses. Solid brass construction, a black nickel finish, and a TPE soft-touch overmold form the body, with dual-size gaskets and T-20 Torx hardware for installation. MANL fuses are sold separately. Ask CarToyz to size fuses and schedule installation.
$55.99 -
Rockford Fosgate RFK1 1/0 AWG Power Installation Kit
Feed a high-current amp with the Rockford Fosgate RFK1 1/0 AWG power installation kit. You get 17 feet of 1/0 AWG power wire, 3 feet of ground wire, 20 feet of remote turn-on wire, an ANL fuse holder, and termination hardware. Cable is 4,704-strand PC-OFC built to full AWG / CTA-2015 requirements. RCA cables are not included. Amplifier and speakers sold separately.
$439.99 -
Stinger SSVLBTN VL Series Negative Battery Terminal
The Stinger SSVLBTN is a negative terminal with 1/0, 4, and two 8 AWG outputs, giving a clean place to land several cables at the battery. Negative battery terminal with four wire outputs. (1) 1/0 AWG, (1) 4 AWG and (2) 8 AWG ports. It suits amplifier installs where the battery terminal has to feed more than one run. Check your battery post style and planned wire gauges before ordering, since fit depends on the vehicle and battery.
$18.99 -
T-SPEC V6-RAK4 V6 Amp Kit with RCA 4 AWG 1000W
Install an amplifier with the T-SPEC V6-RAK4 V6 amp kit for systems up to 1000W. The kit includes 17 ft of 4 AWG CCA power wire, 3 ft of 4 AWG CCA ground wire, 17 ft of 18 AWG remote wire, and a 17 ft V6 noise-rejecting woven coaxial RCA cable. A proprietary V6 MINI-ANL fuse holder with a 60A fuse and nickel-plated terminals complete the power path. Match cable gauge and fuse rating to the amplifier before you schedule installation.
$74.99 -
Rockford Fosgate RFDGM GM Battery Post Extender, Platinum Finish
The Rockford Fosgate RFDGM is a GM battery post extender that allows an additional power or ground connection. It is sold individually for an installation requiring a single added connection at a suitable battery post. Its custom-tooled solid-brass construction and HPP plating provide corrosion resistance with a platinum finish. Match the extender to the battery connection used by the vehicle rather than assuming that every battery has the same post arrangement.
$19.99 -
Stinger SI4612 4000 Series 6-Channel Twisted-Pair RCA Cable
The Stinger SI4612 is a 12 ft 6-channel directional twisted-pair RCA interconnect built to carry your source unit’s signal to an amplifier with minimal noise. Oversized OFC conductors carry a clean signal to the amplifier. 6 channels in one run for multi-channel amplifier setups. It is a straightforward way to replace a worn cable or plan a clean new amplifier install. Confirm the length you need by measuring your planned route from the radio to the amplifier, allowing extra slack for bends, panels, and connections at both ends.
$88.99 -
T-SPEC V8-RTN8 4 AWG Ring Terminals 1/4 in 5pk
Terminate 4 AWG cable with the T-SPEC V8-RTN8 nickel-plated ring terminal five-pack. Official specifications call for a 1/4 in stud hole, and the pack includes three red and two black terminals. This SKU differs from V8-RTN10, which uses a 3/8 in stud hole on the same 4 AWG cable size. Confirm stud diameter on the battery or distribution hardware before ordering through CarToyz.
$11.99 -
Rockford Fosgate RFK4I 4 AWG Power & Signal Kit
Step up to thicker cable with the Rockford Fosgate RFK4I 4 AWG power and signal kit. It packs 17 feet of 4 AWG power wire, 3 feet of 4 AWG ground wire, one 16-foot twisted-pair RCA, 20 feet of remote wire, a MAXI fuse holder with a 100 Amp fuse, and termination hardware. Cable is high-strand PC-OFC that meets full AWG / CTA-2015 requirements. Amplifier and speakers sold separately.
$219.99 -
Raptor RMANLD Pro Series MANL All-in-One Dist. Block
The Raptor RMANLD is a Pro Series Mini ANL all-in-one fused distribution block for amplifier power and ground. It provides one 1/0 input for power and ground, two 4/8 AWG MANL fused power outputs, and two 4/8 AWG ground outputs, with 24K gold plating and 3mm Allen screws. Confirm fuse amperage and wire gauges against the amplifier plan before installation, and treat fuses as sold separately unless packing confirms they are included.
$59.99 -
Stinger SSPRCA2M Performance Series RCA Y-Adapter
The Stinger SSPRCA2M is a RCA Y-adapter, 2 male to 1 female for splitting or combining RCA signals in a car audio system. 2 male to 1 female split for signal routing. coaxial construction. It is a handy part when you need to feed two amplifier inputs from one output, or bridge a pair of outputs into a single input. Check the plug genders on your equipment before ordering so the adapter matches your setup.
$8.99 -
Rockford Fosgate RFK8I 8 AWG Power & Signal Kit
Wire one amplifier with the Rockford Fosgate RFK8I 8 AWG power and signal kit. It includes 17 feet of 8 AWG power wire, 3 feet of 8 AWG ground wire, one 16-foot twisted-pair RCA cable, 20 feet of remote turn-on wire, an AGU fuse holder with fuse, and termination hardware. Cable is PC-OFC and built to full AWG / CTA-2015 copper requirements. The amplifier and speakers are sold separately.
$139.99
