Select your vehicle’s year, make and model to see the Metra, PAC and iDatalink Maestro dash kits, wiring harnesses, antenna adapters and speaker sizes that fit.
The right installation parts are what make a new stereo look and work like it came from the factory. Our install parts help your new receiver, amplifier or speakers fit cleanly and connect properly to your vehicle, using trusted installation brands such as Metra and PAC.
Dash kits mount an aftermarket single or double din stereo in your dash with trim that matches your interior. Wire harnesses connect your new stereo to the factory wiring, so there’s no cutting or splicing of your vehicle’s original wires. Antenna adapters connect your factory antenna to an aftermarket radio so you keep clear AM/FM reception.
Adding an amplifier? Our amp wire kits include the power, ground and signal wiring you need to run your amplifier safely and get the most out of your system.
Not sure which parts fit your vehicle? Bring us your vehicle’s year, make and model, or come in to a store near you, and our installers will help you find the right parts for the job.
-
Stinger SSPRCA15 Performance Series Coaxial RCA Cable
The Stinger SSPRCA15 is a 1.5 ft 2-channel coaxial RCA interconnect built to carry your source unit’s signal to an amplifier with minimal noise. Coaxial construction for dependable signal transfer. paired male-to-male RCA plugs. It is a straightforward way to replace a worn cable or plan a clean new amplifier install. Confirm the length you need by measuring your planned route from the radio to the amplifier, allowing extra slack for bends, panels, and connections at both ends.
$8.99 -
Rockford Fosgate RFFANL Inline ANL/MAXI Fuse Holder, 1/0 or 4 AWG
The Rockford Fosgate RFFANL is an inline holder for ANL wafer-style or MAXI blade-style fuses. Its cable connections accept 1/0 AWG wire, with two supplied reducing couplers supporting 4 AWG cable. The custom-tooled solid-brass holder uses HPP plating for corrosion resistance and has a platinum finish. It lets an installer select one of the supported fuse formats while retaining the stated cable-size options.
$64.99 -
Stinger SSRCB2F Competition Series RCA Y-Adapter
The Stinger SSRCB2F is a twisted-pair RCA Y-adapter, 2 female to 1 male for splitting or combining RCA signals in a car audio system. 2 female to 1 male split for signal routing. tightly twisted-pair construction aids noise rejection. It is a handy part when you need to feed two amplifier inputs from one output, or bridge a pair of outputs into a single input. Check the plug genders on your equipment before ordering so the adapter matches your setup.
$8.99 -
T-SPEC V8-RTN1 1/0 AWG Ring Terminals 1/4 in 5pk
Terminate 1/0 AWG power or ground cable with the T-SPEC V8-RTN1 nickel-plated ring terminal five-pack. Each terminal is specified for a 1/4 in stud hole, and the pack includes three red and two black terminals for polarity identification. Crimp only to 1/0 AWG cable and match the stud hardware on the battery, fuse holder, or distribution block. Ask CarToyz if you need the matching cable kit or professional crimping.
$17.99 -
Rockford Fosgate RFI-16 16-Foot Twisted-Pair RCA Signal Cable
The Rockford Fosgate RFI-16 provides a 16-foot twisted-pair RCA signal connection. Its oxygen-free copper conductors and platinum-plated ends are paired with a split center pin for a secure connection to compatible RCA jacks. The twisted-pair design addresses RFI and EMI noise rejection, while the frosted outer shield adds flexibility and durability. Measure the planned cable route before choosing this length for a connection between audio components.
$19.99 -
Stinger SSFDB428 MIDI Fused Distribution Block, 4 AWG In, (2) 8 AWG Out
The Stinger SSFDB428 is a 4 AWG in, two fused 8 AWG outputs, helping you split or join power and ground runs neatly. One 4 AWG input feeds two fused 8 AWG outputs. uses MIDI-style fuses. It is a practical part for multi-amplifier systems or for tidying an install where several cables meet. Confirm the gauges of your input and output wires before ordering so every connection seats properly.
$68.99 -
T-SPEC V8-RTN10-20 4 AWG Ring Terminals 3/8 20pk
Stock 4 AWG ring terminals with the T-SPEC V8-RTN10-20 twenty-pack. Terminals are nickel-plated for 4 AWG cable and use a 3/8 in stud hole. The assortment includes ten red and ten black terminals for repeated installs or shop inventory. It matches the stud size of the V8-RTN10 five-pack. Confirm 3/8 in hardware before ordering larger quantities through CarToyz.
$38.99 -
Rockford Fosgate RFFM80 80A MAXI Fuses, Platinum Finish, 2-Pack
The Rockford Fosgate RFFM80 package contains two 80-amp MAXI fuses with a platinum finish. Choose this pack when an installation specifies both the MAXI fuse format and a 80-amp rating. The platinum-plated construction is part of Rockford Fosgate’s installation-accessory range. Check the existing holder and the cable and equipment requirements before choosing a replacement; the fuse format and current rating both need to match the planned circuit.
$9.99 -
Stinger SSK4ANL 4 AWG 1000W Amplifier Wiring Kit with ANL Fuse Holder
The Stinger SSK4ANL is a complete 4 AWG CCA amp kit with ANL fuse holder, gathering the main wiring for a single amplifier install in one box. 4 AWG CCA power and ground wire for amplifiers up to 1000 W. ultra-flexible matte jackets route easily through the vehicle. It also includes remote turn-on and speaker wire to complete the job. Measure your vehicle’s power route before ordering, and confirm the kit’s wire gauge and fuse rating suit your amplifier’s current draw.
$78.99 -
Rockford Fosgate RFFA300 300A ANL Fuses, Platinum Finish, 2-Pack
The Rockford Fosgate RFFA300 package contains two 300-amp ANL fuses with a platinum finish. Choose this pack when an installation specifies both the ANL fuse format and a 300-amp rating. The platinum-plated construction is part of Rockford Fosgate’s installation-accessory range. Check the existing holder and the cable and equipment requirements before choosing a replacement; the fuse format and current rating both need to match the planned circuit.
$14.99 -
Stinger SI4617 4000 Series 6-Channel Twisted-Pair RCA Cable
The Stinger SI4617 is a 17 ft 6-channel directional twisted-pair RCA interconnect built to carry your source unit’s signal to an amplifier with minimal noise. Oversized OFC conductors carry a clean signal to the amplifier. 6 channels in one run for multi-channel amplifier setups. It is a straightforward way to replace a worn cable or plan a clean new amplifier install. Confirm the length you need by measuring your planned route from the radio to the amplifier, allowing extra slack for bends, panels, and connections at both ends.
$48.99 -
Raptor R5A01 Pro Series 1/0 AWG OFC Amp Kit, 3800W
The Raptor R5A01 is a Pro Series amplifier installation kit built around tinned oxygen-free copper 1/0 AWG power and ground cable. Metra rates the kit for systems up to 3800 watts and includes a 17-foot Pro Series dual-twist RCA cable, remote turn-on wire, an ANL fuse holder with a 200A fuse, ring terminals, and installation hardware. Confirm the amplifier’s current draw, battery feed, and fuse plan before you run the cables through the vehicle.
$279.99
