Select your vehicle’s year, make and model to see the Metra, PAC and iDatalink Maestro dash kits, wiring harnesses, antenna adapters and speaker sizes that fit.
The right installation parts are what make a new stereo look and work like it came from the factory. Our install parts help your new receiver, amplifier or speakers fit cleanly and connect properly to your vehicle, using trusted installation brands such as Metra and PAC.
Dash kits mount an aftermarket single or double din stereo in your dash with trim that matches your interior. Wire harnesses connect your new stereo to the factory wiring, so there’s no cutting or splicing of your vehicle’s original wires. Antenna adapters connect your factory antenna to an aftermarket radio so you keep clear AM/FM reception.
Adding an amplifier? Our amp wire kits include the power, ground and signal wiring you need to run your amplifier safely and get the most out of your system.
Not sure which parts fit your vehicle? Bring us your vehicle’s year, make and model, or come in to a store near you, and our installers will help you find the right parts for the job.
-
Rockford Fosgate RFI-6 6-Foot Twisted-Pair RCA Signal Cable
The Rockford Fosgate RFI-6 provides a 6-foot twisted-pair RCA signal connection. Its oxygen-free copper conductors and platinum-plated ends are paired with a split center pin for a secure connection to compatible RCA jacks. The twisted-pair design addresses RFI and EMI noise rejection, while the frosted outer shield adds flexibility and durability. Measure the planned cable route before choosing this length for a connection between audio components.
$14.99 -
Stinger SPF52150 Shoc-Krome 150 Amp ANL Fuse, Single Pack
The Stinger SPF52150 is a 150A ANL fuse with Shoc-Krome plating for protecting the main power wire in a car audio system. 150 amp ANL-style fuse for main power protection. shoc-Krome plating for high-conductivity contact. Keep one on hand as a spare or use it in a new amplifier install. Choose the fuse rating based on your power wire gauge and amplifier current draw, and confirm your holder accepts ANL-style fuses before ordering.
$8.99 -
T-SPEC VPNB2 MANL Power/Ground Block 2 Position
Combine power and ground distribution with the T-SPEC VPNB2 MANL block. The positive side accepts dual 1/0–4 AWG inputs and two 4/8 AWG outputs, while the negative side accepts one 1/0–4 AWG input and two 4/8 AWG outputs. It works with MANL fuses and uses solid brass construction with a black nickel finish. Fuses are sold separately. Ask CarToyz for a system layout review and installation quote.
$39.99 -
Rockford Fosgate RFDB1 Positive/Negative Battery Terminal Clamp
The Rockford Fosgate RFDB1 battery terminal clamp supports a positive or negative battery connection using its supplied sizing ring. It accommodates 1/0 AWG, 4 AWG and 8 AWG cable sizes as specified for its connection ports. Custom-tooled solid brass and HPP plating provide a corrosion-resistant connection with a platinum finish. Use the available ports to organize supported cables at the battery rather than selecting a terminal by appearance alone.
$54.99 -
Stinger SSPRCA17 Performance Series Coaxial RCA Cable
The Stinger SSPRCA17 is a 17 ft 2-channel coaxial RCA interconnect built to carry your source unit’s signal to an amplifier with minimal noise. Coaxial construction for dependable signal transfer. paired male-to-male RCA plugs. It is a straightforward way to replace a worn cable or plan a clean new amplifier install. Confirm the length you need by measuring your planned route from the radio to the amplifier, allowing extra slack for bends, panels, and connections at both ends.
$18.99 -
T-SPEC V8-ST1 4 AWG Spade Terminals 1/4 in 5pk
Connect 4 AWG cable at an amplifier or distribution point with the T-SPEC V8-ST1 nickel-plated spade terminal five-pack. Terminals are specified for a 1/4 in connection, and the pack includes three red and two black pieces for polarity marking. Crimp only to 4 AWG cable and match the screw or post size on the equipment. Ask CarToyz for help selecting ring versus spade terminals for the job.
$8.99 -
Rockford Fosgate RFFA100 100A ANL Fuses, Platinum Finish, 2-Pack
The Rockford Fosgate RFFA100 package contains two 100-amp ANL fuses with a platinum finish. Choose this pack when an installation specifies both the ANL fuse format and a 100-amp rating. The platinum-plated construction is part of Rockford Fosgate’s installation-accessory range. Check the existing holder and the cable and equipment requirements before choosing a replacement; the fuse format and current rating both need to match the planned circuit.
$14.99 -
Stinger SSVLBTP VL Series Positive Battery Terminal
The Stinger SSVLBTP is a positive terminal with 1/0, 4, and two 8 AWG outputs, giving a clean place to land several cables at the battery. Positive battery terminal with four wire outputs. (1) 1/0 AWG, (1) 4 AWG and (2) 8 AWG ports. It suits amplifier installs where the battery terminal has to feed more than one run. Check your battery post style and planned wire gauges before ordering, since fit depends on the vehicle and battery.
$18.99 -
Rockford Fosgate RFFA150 150A ANL Fuses, Platinum Finish, 2-Pack
The Rockford Fosgate RFFA150 package contains two 150-amp ANL fuses with a platinum finish. Choose this pack when an installation specifies both the ANL fuse format and a 150-amp rating. The platinum-plated construction is part of Rockford Fosgate’s installation-accessory range. Check the existing holder and the cable and equipment requirements before choosing a replacement; the fuse format and current rating both need to match the planned circuit.
$14.99 -
Raptor RDB3 Pro Series 2-Position Ground Dist. Block
The Raptor RDB3 is a Pro Series 2-position ground distribution block for simpler amplifier layouts. It accepts a 1/0 or 4 AWG input and provides two 4 or 8 AWG outputs, with 24K gold-plated connections and 3mm Allen screws. Choose it when two ground branches are enough for the planned amplifier or accessory layout, and confirm polarity before fastening the cover hardware.
$24.99 -
Stinger SSVLANL2 VL Series Water-Resistant ANL Fuse Holder
The Stinger SSVLANL2 is a water-resistant ANL fuse holder, 1/0 or 4 AWG, protecting your amplifier power wire close to the battery. Water-resistant ANL fuse holder. accepts 1/0 or 4 AWG inputs. It suits new installs as well as replacing an older holder in an existing system. The fuse itself is not confirmed as included, so plan to order a fuse rated for your wire gauge and amplifier current draw.
$28.99 -
Rockford Fosgate RFTS4 4 AWG Crimp Ring Terminals, 4-Pack
The Rockford Fosgate RFTS4 pack contains 4 seamed crimp-style ring terminals with a platinum finish. These terminals provide the stated connection style for a cable termination, with HPP plating for corrosion resistance. Choose the terminal style to match the connection point and confirm the cable size before crimping. The number supplied is useful when planning the required terminations, but the terminal and the equipment connection still need to be checked together.
$9.99
