Select your vehicle’s year, make and model to see the Metra, PAC and iDatalink Maestro dash kits, wiring harnesses, antenna adapters and speaker sizes that fit.
The right installation parts are what make a new stereo look and work like it came from the factory. Our install parts help your new receiver, amplifier or speakers fit cleanly and connect properly to your vehicle, using trusted installation brands such as Metra and PAC.
Dash kits mount an aftermarket single or double din stereo in your dash with trim that matches your interior. Wire harnesses connect your new stereo to the factory wiring, so there’s no cutting or splicing of your vehicle’s original wires. Antenna adapters connect your factory antenna to an aftermarket radio so you keep clear AM/FM reception.
Adding an amplifier? Our amp wire kits include the power, ground and signal wiring you need to run your amplifier safely and get the most out of your system.
Not sure which parts fit your vehicle? Bring us your vehicle’s year, make and model, or come in to a store near you, and our installers will help you find the right parts for the job.
-
Stinger SSK8 8 AWG 600W Amplifier Wiring Kit with MIDI Fuse Holder
The Stinger SSK8 is a complete 8 AWG CCA amp kit with MIDI fuse holder, gathering the main wiring for a single amplifier install in one box. 8 AWG CCA power and ground wire for systems up to 600 W. water-resistant MIDI fuse holder with 60A fuse. It also includes remote turn-on and speaker wire to complete the job. Measure your vehicle’s power route before ordering, and confirm the kit’s wire gauge and fuse rating suit your amplifier’s current draw.
$38.99 -
T-SPEC VANL ANL Fuse Holder for 1/0–4 AWG
Protect a power run with the T-SPEC VANL ANL fuse holder for 1/0 to 4 AWG cable. It works with standard ANL fuses and includes a dual-size gasket set for 1/0 and 4 AWG wire. Rounded set screws and T-20 Torx hardware support clean clamping, and the TPE soft-touch overmold adds grip. The fuse is sold separately. Chat with CarToyz for fuse amperage, cable kits, and installation appointments.
$35.99 -
Rockford Fosgate RFTS1 Crimp Ring Terminals, 2-Pack
The Rockford Fosgate RFTS1 pack contains 2 seamed crimp-style ring terminals with a platinum finish. These terminals provide the stated connection style for a cable termination, with HPP plating for corrosion resistance. Choose the terminal style to match the connection point and confirm the cable size before crimping. The number supplied is useful when planning the required terminations, but the terminal and the equipment connection still need to be checked together.
$9.99 -
Stinger SSVLANL VL Series 1/0 or 4 AWG ANL Fuse Holder
The Stinger SSVLANL is a ANL fuse holder for 1/0 or 4 AWG wire, protecting your amplifier power wire close to the battery. ANL fuse holder accepts 1/0 or 4 AWG inputs. satin silver finish resists corrosion. It suits new installs as well as replacing an older holder in an existing system. The fuse itself is not confirmed as included, so plan to order a fuse rated for your wire gauge and amplifier current draw.
$8.99 -
T-SPEC V6-RAK8 V6 Amp Kit with RCA 8 AWG 400W
Connect an amplifier with the T-SPEC V6-RAK8 V6 amp kit for systems up to 400W. It supplies 17 ft of 8 AWG CCA power wire, 3 ft of 8 AWG CCA ground wire, 17 ft of 18 AWG remote wire, and a 17 ft V6 noise-rejecting woven coaxial RCA cable. A proprietary V6 MINI-ANL fuse holder with a 30A fuse and nickel-plated terminals are included. Verify gauge and fuse requirements for the amplifier before purchase or professional installation.
$47.99 -
Raptor R5R174 Pro Series 4-Channel RCA Cable, 17 ft
The Raptor R5R174 is a Pro Series 4-channel RCA interconnect cut to 17 feet for multi-channel amplifier installs. Dual-twist construction and a compact tip design support flexible routing between a source unit or processor and the amplifier. Choose this length when the signal path needs a longer run than shorter Pro Series options, and keep the cable separated from high-current power lines when the vehicle layout allows.
$49.99 -
Stinger SPF52250 Shoc-Krome 250 Amp ANL Fuse, Single Pack
The Stinger SPF52250 is a 250A ANL fuse with Shoc-Krome plating for protecting the main power wire in a car audio system. 250 amp ANL-style fuse for high-current power runs. shoc-Krome plating for high-conductivity contact. Keep one on hand as a spare or use it in a new amplifier install. Choose the fuse rating based on your power wire gauge and amplifier current draw, and confirm your holder accepts ANL-style fuses before ordering.
$8.99 -
T-SPEC V8-ANL200 200A ANL Fuses 2-Pack Nickel
Protect a high-current power circuit with T-SPEC V8-ANL200 nickel-plated ANL fuses. Each package contains two 200A ANL fuses, and each fuse includes a status window for a quick visual check. Install them only in a compatible ANL fuse holder that matches the cable size and amplifier load. Choose the amperage from the amplifier and wiring guidance, then ask CarToyz for holder options and installation help.
$8.99 -
Stinger SI1212 1000 Series 2-Channel Coaxial RCA Cable
The Stinger SI1212 is a 12 ft 2-channel coaxial RCA interconnect built to carry your source unit’s signal to an amplifier with minimal noise. Coaxial construction helps reject noise along the signal path. two heavy-gauge conductors per channel. It is a straightforward way to replace a worn cable or plan a clean new amplifier install. Confirm the length you need by measuring your planned route from the radio to the amplifier, allowing extra slack for bends, panels, and connections at both ends.
$18.99 -
Stinger SSGA48 4 to 8 AWG Gauge Reducer Adapter
The Stinger SSGA48 is a steps 4 AWG wire down to an 8 AWG terminal, helping you split or join power and ground runs neatly. Adapts 4 AWG wire to an 8 AWG input. solid brass construction. It is a practical part for multi-amplifier systems or for tidying an install where several cables meet. Confirm the gauges of your input and output wires before ordering so every connection seats properly.
$8.99 -
Stinger SSPRCA3 Performance Series Coaxial RCA Cable
The Stinger SSPRCA3 is a 3 ft 2-channel coaxial RCA interconnect built to carry your source unit’s signal to an amplifier with minimal noise. Coaxial construction for dependable signal transfer. paired male-to-male RCA plugs. It is a straightforward way to replace a worn cable or plan a clean new amplifier install. Confirm the length you need by measuring your planned route from the radio to the amplifier, allowing extra slack for bends, panels, and connections at both ends.
$8.99 -
Stinger SI129 1000 Series 2-Channel Coaxial RCA Cable
The Stinger SI129 is a 9 ft 2-channel coaxial RCA interconnect built to carry your source unit’s signal to an amplifier with minimal noise. Coaxial construction helps reject noise along the signal path. two heavy-gauge conductors per channel. It is a straightforward way to replace a worn cable or plan a clean new amplifier install. Confirm the length you need by measuring your planned route from the radio to the amplifier, allowing extra slack for bends, panels, and connections at both ends.
$18.99
