Rockford Fosgate P1V2-5 Punch P1 5.25″ 3-Way Coaxials
Punch P1 5.25-inch three-way coaxials with OEM adaptors
$199.99
Overview
The Rockford Fosgate P1V2-5 is a pair of Punch P1 5.25-inch 3-way coaxials rated at 75 watts RMS and 150 watts peak into 4 ohms. A Tetolon inverted-dome tweeter and co-witnessed piezo sit above a mica-reinforced polypropylene cone. Twist-lock and OEM adaptors for Ford/Mazda, Jeep, and Chrysler openings ship in the box with a cutout template and mounting hardware. Grilles are sold separately.
Product details
5.25-inch Punch P1 coaxials
Door and dash openings around 5.25 inches are common upgrade targets. The P1V2-5 pairs a mica-reinforced polypropylene midrange with a 3/4-inch Tetolon inverted-dome tweeter and a 3/8-inch co-witnessed piezo so highs stay present without a separate component set. Rockford Fosgate rates the pair at 75 watts RMS and 150 watts peak into 4 ohms, with response from 56 Hz to 25 kHz and 86 dB sensitivity (1 W/1 m). VAST 2.0 surround design is intended to increase effective cone area for stronger midbass from the same cutout.
Adaptors for common vehicles
Beyond the speakers themselves, Rockford includes 4-tab twist-lock adaptors, 5.25-to-4×6 adaptors for Ford/Mazda, Jeep 3-tab adaptors, and Chrysler 3-tab adaptors so more factory openings are covered out of the box. A removable motor cover trims rear depth when space is tight. Mounting depth without the cover is 2.31 inches; front-loading depth with the twist-lock adaptor is 2.60 inches. Cutout diameter is 4.37 inches.
Crossover and kit contents
An ICC+ concealed 6 dB/octave high-pass at 9 kHz steers the tweeter. The box also includes a cutout template, screws, wire leads, and crimp connectors. Grilles are not included. Confirm your head unit or amp can supply clean power near the 75-watt RMS rating.
Key features
- Pair of 5.25-inch Punch P1 3-way coaxial speakers, 4 ohm
- 75 watts RMS / 150 watts peak power handling for the set
- 3/4-inch Tetolon inverted-dome tweeter plus co-witnessed 3/8-inch piezo
- Mica-reinforced polypropylene cone with durable Santoprene half-roll surround
- Twist-lock and OEM adaptors for Ford, Mazda, Jeep, and Chrysler
- ICC+ internal 6 dB/octave concealed crossover network onboard
- Mounting depth from 2.31 in; cutout diameter 4.37 in
- Includes template, screws, wire leads, and crimp connectors
- Grilles sold separately; speakers ship as a matched pair
Specifications
| Weight | 5 lbs |
|---|---|
| Dimensions | 15 × 9.5 × 6 in |
| Size | 5.25 inch |
| Speaker Type | Coaxial |
| Brand | Rockford Fosgate |
| Model | P1V2-5 |
| SKU | P1V25 |
| Product type | Speakers |
| Midrange Size (Nominal Diameter) | 5.25" |
| Tweeter Size (Nominal Diameter) | 3/4" (19 mm) inverted dome |
| Piezo Size (Nominal Diameter) | 3/8" (9 mm) co-witnessed convex |
| Nominal Impedance | 4 ohm |
| Power Handling (RMS) | 75 Watts RMS / 150 Watts Peak |
| Frequency Response | 56 Hz – 25 kHz |
| Sensitivity (1W/1M) | 86 dB |
| Sensitivity (2.83V/1M) | 89 dB |
| Crossover | Tweeter high-pass 9 kHz @ 6 dB/octave (ICC+) |
| Voice Coil Diameter | 1" (25.4 mm) |
| Fs | 75 Hz |
| Cutout Diameter | 4.37" (111 mm) |
| Front-Loading Depth (Twist-Lock Adaptor) | 2.60" (66 mm) |
| Rear-Loading Depth (Twist-Lock Adaptor) | 2.33" (59.2 mm) |
| Min. Mounting Depth (No Motor Cover) | 2.31" (58.6 mm) |
| Front Side Clearance | 0.44" (11.1 mm) |
| Removable Motor Cover | Yes |
| Grille/Trim Ring Included | No |
| Mounting Hardware | Yes |
| Shipping Weight | 5 lbs (2.27 kg) |
Important notes
- Sold as a matched pair. An amplifier and grilles are not included.
- Confirm which included adaptor matches your vehicle before cutting or mounting.
- Check clearance against the listed mounting depths with and without the motor cover.
- Match amplifier or head-unit power to the 75-watt RMS / 4-ohm rating.
What's in the box
- (2) 5.25-inch 4-ohm 3-way coaxial speakers
- (1) 5.25-inch speaker cutout template
- (2) 5.25-inch 4-tab twist-lock adaptors
- (2) 5.25-inch to 4×6 adaptors (Ford/Mazda)
- (2) 5.25-inch 3-tab adaptors (Jeep)
- (2) 5.25-inch 3-tab adaptors (Chrysler)
- Mounting screws, wire leads, and crimp connectors
