Rockford Fosgate PEQ Remote Punch EQ Control
Wired bass and treble remote for select 2007+ amplifiers
$49.99
Overview
Tune Punch EQ from the dash with the Rockford Fosgate PEQ remote. It works with select 2007 and newer Punch and Power amplifiers over an RJ45 (8-conductor, non-flipped) connection and a 16.5-foot (503 cm) cable. Bass boost runs 0 to +18 dB at 45 Hz and treble 0 to +12 dB at 12.5 kHz, following the amp’s HP / LP / AP crossover mode. Mounting clip and screws are included.
Product details
Dash-mounted Punch EQ
PEQ puts wired Punch equalization within reach so you can change bass and treble without opening the trunk. It uses under-dash, center-console, or glovebox mounting, an RJ45 connector, and a 16.5-foot cable. Bass boost is 0 to +18 dB at 45 Hz; treble boost is 0 to +12 dB at 12.5 kHz.
Tracks the amp’s crossover mode
When the amplifier crossover is in high-pass mode, PEQ boosts treble only. In low-pass mode it boosts bass only. In all-pass mode it boosts both. On four-channel amps it controls bass on the rear outputs. Compatible with select 2007 and newer Punch and Power amplifiers that accept the Punch EQ remote.
Key features
- Wired Punch EQ remote for select 2007 and newer Punch and Power amplifiers
- Bass boost 0 to +18 dB @ 45 Hz; treble boost 0 to +12 dB @ 12.5 kHz
- Boost follows amplifier HP / LP / AP crossover mode
- RJ45 (8-conductor, non-flipped) connector
- 16.5-foot (503 cm) cable with under-dash mounting clip and screws
Specifications
| Weight | 0.6 lbs |
|---|---|
| Dimensions | 7.5 × 6 × 2.5 in |
| Brand | Rockford Fosgate |
| Model | PEQ |
| SKU | PEQ |
| Product type | Amplifier remote |
| Compatibility | Select 2007 and newer Punch and Power amplifiers |
| Connector | RJ45 (8-conductor, non-flipped) |
| Mounting | Under dash / console / glovebox |
| Bass boost | 0 to +18 dB @ 45 Hz |
| Treble boost | 0 to +12 dB @ 12.5 kHz |
| Cable length | 16.5 ft (503 cm) |
| Included | Knob, cable, mounting clip, screws |
| Amp Knob | Amp Knob |
Important notes
- For select 2007 and newer Punch and Power amplifiers with a Punch EQ remote port. Confirm compatibility before purchase.
- On four-channel amplifiers, PEQ controls bass on the rear outputs.
- Amplifier is sold separately.
What's in the box
- PEQ remote knob
- 16.5-foot RJ45 cable
- Mounting clip and screws
